Fermentation

This collection container fits the FermZilla Tri-Conical fermenter with 3 Inch x 3 Inch Butterfly Valve. Incl. Tri Clover Clamp, End Cap and Seal. NOTE: Fits only Gen3 (Tri-Conical)

Brewly Racking Arm for Conical Fermenter with 2pcs silicone o-rings with 9mm outer diameter and 6mm inner diameter, thickness ca 1,5mm.

The jacket can retain the heat generated during the fermentation and improve the performance of the fermenter, even when you are fermenting in a cold room.The jacket is also a must if you have the lid with spiral cooler. The jacket can help with an even more controlled and effective temperature regulating inside the fermenter.Insulation thickness: 6 mm.Material: durable and rugged styrene butadiene rubber.

The jacket can retain the heat generated during the fermentation and improve the performance of the fermenter, even when you are fermenting in a cold room.The jacket is also a must if you have the lid with spiral cooler. The jacket can help with an even more controlled and effective temperature regulating inside the fermenter.Insulation thickness: 6 mm.Material: durable and rugged styrene butadiene rubber.

The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc. The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:338 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.

This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.

This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.

Coobra Universal thermostat with EU-connections for cooling & heating at the same time and control both manually and via Wifi app.Perfect for home brewing, fermentation breeding, incubation, greenhouse, etc.- Intelligent digital display temperature controlled outlets- Temperature range -30 - 105 ℃- Supports both Celcius and Fahrenheit- WiFi 2.4GHz wireless connection- Mobile Smartlife APP control- Manual control or app controlled.- Double relay output: connect cooling & heating at the same time- automatic alarm for high/low temperature- temperature peak, Update once in 1s- Heating/cooling mode- temperature unit conversion- Programmable in up to 7 day intervals- compressor delay protection.- Temperature sensor with 150cm cord and suction cup for fastening.

Brewly CPF35L Chiller 5,5 meters - Cooling spiral in 304 stainless steel for Brewly CPF35L pressure fermenter. NOTE: Includes only the chiller/cooling spiral, not the other equipment in the picture.

Brewly CPF35L Chiller - Cooling spiral in 304 stainless steel for Brewly CPF35L pressure fermenter. NOTE: Includes only the chiller/cooling spiral, not the other equipment in the picture.

Food grade HDPE plastic bottle of the highest quality. Neutral, natural plastic color (slightly transparent). Including black 28mm screw cap (cap).Diameter: 82.5mmHeight: 255mmMaterial: HDPE plasticCap Dimension: 28mmVolume: 1000mlWeight: 50gStandard Color: Uncolored.Screen printing: YesVolume Gradation: No

Brewly Stainless Float With Silicone Dip Tube 80cm. Ensure that only the top layer of beer is poured from the fermenter, also fits Fermzilla perfectly. Silikcone tube measurements (dip tube):Inner diameter: 6mm (ID 0.23”)Outer diameter: 8mm (OD 0,35”) Floater diameter: 43mm

Air Lock Compact Mini 30L in transparent plastic that fits ordinary plastic fermenters as well as FermZilla and Brewly fermenters. Very compact - adds just 45mm. Easy to clean. Fits 9mm holes. DimensionsTotalt height: 90mmAir lock part height: 45mm (if the air lock is pressed down completely it adds just 45mm)Diameter: 35mm

FermZilla 35L Insulation Jacket

Spiral fermenter air lock with red or yellow cap. 10mm diameter.

The filter prevents hop residue etc from beeing sucked up into a hose, use in kegs, fermenters etc (not with float). Made from HDPE and 304 Grade stainless steel mesh this product can be boiled or sanitized with most detergents.The float can be mounted in three different places on the filter, to determine how close to the surface you want to suck up liquid.Dimensions: 40 x 28 mm. Hose holder diameter: 8 mm, perfect for 6mm inner diameter silicone tube/hose. Materials: Stainless steel 300 mesh and plastic. NOTE: dont use with float as there are no attachments for float on the filter

Fits CO2/Beer Ball-lock-coupling. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Stainless steel.Liquid and Gas ball lock compatible. Barbed fitting fits 4mm, 5mm & 6mm ID hose

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. Stainless steel.Brewly Stainless Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x SS Float & 80cm Silicone Dip TubeThis inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all together.

Brewly Seals 10-pack for Carbonation Caps & Ball Locks

Manometer Low Pressure 0-100 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-7 bar (0-100 psi).This is the same pressure gauge that comes fitted to the MK4 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Manometer Low Pressure 0-4500 psi for CO2 - 1/4" NPT. Spare part for CO2 regulator. Manometer for reading the pressure into the regulator. Measures 0-300 bar (0-4500 psi).This is the same pressure gauge that comes fitted to the MK4/MK5 regulator from Kegland. The pressure gauge fits most CO2 regulators with 1/4" NPT thread. Please note that these regulators have left-hand threaded pressure gauges. Then this one will not fit.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this RED coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

RAPT Pill - Clear Housing (Male Threaded - Bottom Piece). Replace your RAPT Pill bottom housing with the RAPT Clear Housing shell. Please note there are no clear top pieces for the RAPT Pill at this stage.

This duotight 8mm (5/16") adaptor is designed to suit the Nukatap Mini and will allow couple your Nukatap mini to a wide range of other 8mm(5/16") duotight fittings or alternatively be able to attach to a Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adaptor.  The combination of the two fittings prevents the tap spinning around while in use. Note: kit contains no Nukatap or ball lock disconnect.

NukaTap Mini Wall Mount Shank Kit - Duotight Adaptor 8mm (5/16"). Note: kit contains no Nukatap or ball lock disconnect.SPECIFICATIONSBeer Line Diameter: Suits any EVABarrier beer line in with 8mm ID Beer line such as the 4mm x 8mm EVABarrier beer line or the 5mm x 8mm EVABarrier beer Line.Collet and Screw Cover: 304 Grade Stainless SteelO-ring Material: Dual o-ring Silicone/EPDM combinationPlastic Mounting: POKTemperature Range: -10C and up to 100CMax Pressure: 150psi

Brewly Lid in stainless steel for CF 30L Conical Fermenter. Includes Lid, silicone seal, silicone plug for airlock. Spare part.

Brewly Lid in stainless steel for CCF 30L Conical COOLING Fermenter. Includes Lid, silicone seal, silicone plug for airlock. Spare part.

Brewly CPF35L 900ml Collection Container. Spare part.

Brewly Lid in stainless steel for CF 60L Conical Fermenter. Includes Lid, silicone seal, silicone plug for airlock. Spare part.

Brewly Lid in stainless steel for CCF 60L Conical COOLING Fermenter. Includes Lid, silicone seal, silicone plug for airlock. Spare part.

Brewly CPF35L Manometer for Conical Pressure Fermenter 35L. Spare part.

Charge your Pill wirelessly with this easy-to-install upgrade kit from KegLand. The RAPT Pill is a Wifi & Bluetooth hydrometer for logging fermentation to the cloud. No need to take your RAPT Pill housing apart for charging! Or even to connect to the RAPT Captive Portal. Includes:1 x USB-C Wireless Charging Coil2 x Adhesive Weight Pads1 x USB-A to USB-C cord (AU power plug not supplied)1 x Black RAPT Wireless Charging Dock (USB-C)If the green light does not flash green (captive portal open), it means your battery is insufficiently charged. Leave your pill on the charging pad for 24 hours or until it is fully charged (red light turns off). Then lift the Pill on and off the charging pad and it will activate the captive portal (green light will start to flash).See video below how to update your Pill:

The Icemaster G20 Glycol Chiller is a perfect solution for precise temperature control. With powerful cooling, dual independent pumps, and a compact design, it’s perfect for home brewers and small-scale breweries. From chilling wort to maintaining fermentation temperatures and crash cooling, this chiller ensures consistency and quality in every batch. It can also control heating devices using the onboard controller with some modification.See videos down the page. - Dual Temperature Control: Independently chill two fermenters with integrated pumps and precise digital controllers.- Efficient Cooling Power: 500-watt compressor and R600a refrigerant deliver reliable performance with low energy use.- Compact Design: Small footprint and durable build fit seamlessly into home or small brewery setups.- Large Glycol Capacity: 16.42-litre tank supports effective cooling for wort chilling, crash cooling and fermentation.- Precise Temperature Control: Maintain exact fermentation temperatures for perfect brewing results.SpecificationsRefrigerant: R600a (Isobutane)Cooling Power: 500 watts (0.67 HP)Power Consumption: 155 wattsTank Capacity: 16.42 litresMaximum Head (Per Pump): 5 metresMaximum Flow (Per Pump): 600 litres per hourOutput Barb Size: Compatible with 10 mm inner diameter tubing (ca 3/8")Dimensions: 510 mm x 300 mm x 460 mm (L x W x H)Weight: 25 kgPRODUCT MANUALClick here to open This glycol chiller features 500 watts (0.67 HP) of cooling power, rated at an ambient temperature of 22°C, ensuring reliable operation even in warmer conditions. It is powerful enough to chill well-insulated fermenters up to 200L in size or multiple smaller fermenters.Using environmentally friendly R600a isobutane refrigerant, the Icemaster G20 Glycol Chiller offers exceptional cooling efficiency while maintaining eco-conscious standards. Equipped with a 16.42-litre tank, the chiller works optimally with a glycol-water mixture (20-30% glycol concentration) to achieve a freezing point of approximately -8°C. This ensures the perfect balance of heat transfer efficiency and freeze protection, making the glycol chiller ideal for a wide range of brewing needs, from chilling wort to maintaining fermentation temperatures.

The NukaTap Mini is designed for home brewers and portable draft systems, offering a controlled flow rate to reduce foaming and ensure a smooth pour. Its compact size makes it ideal for mini keg setups, fitting easily into tight spaces like domestic fridges.NOTE: Tap only, for connection kit, see below. Key FeaturesForward Sealing Technology: Ensures sanitary operation and reduces maintenance.Superior Laminar Flow: Minimises beer wastage and foam.Durable Construction: Made from robust POK and Santoprene® materials.Low First Pour Foam: High insulation properties keep the tap cool.Versatile Installation: Easy to set up and compatible with various systems.Experience the perfect pour every time with the NukaTap Mini, combining innovative design with practical functionality for all your brewing needs.For measurements, see images. Most conventional beer taps are designed with 10mm diameter nozzle/spout so you can pour pint in just over 10sec.  This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not not necessary or desirable for all applications.  For compact portable systems, or for home brew draft systems a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body.  This Nukatap mini is also more idea for pouring smaller doses.  For examples cocktails where 150-250ml of liquid is dispensed is difficult to control with a high flow rate tap.  For portable systems this tap and FC ball lock disconnect assembly is small enough to literally put in your pocket making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this BLUE coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

Jazz up your clear Kegland RAPT Pill Hydrometer and Thermometer with this GREEN coloured Pill housing allowing you to quickly customise and differentiate your RAPT Pills. This coloured housing allows you to customise your RAPT Pill. This is purely aesthetic and means you can easily differentiate multiple RAPT Pills from each other. Does not include clear Pill Housing and double o-rings shown in the images RAPT Pill circuit board sold seperately.

NukaTap Mini & FC (Gen2) Self Closing Tap Spring. This Nukatap mini & Nukatap FC spring is designed to suit all Nukatap Mini taps and also the Nukatap FC tap.  This custom made 304 grade spring size is designed specifically to ensure your Nukatap stays closed when it should. Simple let go of the tap handle and the tap will snap shut and prevent accidentally leaving the tap on and emptying the keg onto the floor. This handy inexpensive devices suits all Nukatap Mini and Nukatap FC taps and shank combinations.

The Brew Cooler is a waterproof, insulated cooling bag to keep correct fermentation temperature in fermenters up to 30L. Perfect if you dont have space or possibility to place your fermenter in a temperature controlled refrigerator at home.How the Brew Cooler worksThe function is simple, place your fermenter inside the Brew Cooler and add frozen water bottles (preferrably plastic) inside the Brew Cooler to reduce and keep the correct fermentation temperature. The volume of frozen water in the plastic bottles determines how many degrees below room temperature the fermenter will be kept at. The frozen water bottles should preferrably be replaced every 24 hours, or when needed.1. Place the Brew Cooler at a suitable location in your home. Place your fermenter with wort inside the Brew Cooler.2. Place the correct number of frozen water bottles inside the Brew Cooler according to the Temperature Chart below.3. Close Brew Cooler zip locks.4. After 24 hours, exchange the frozen water bottles for new ones.Temperature Chart: Choose the correct fermentation temperatureThis chart gives examples of the number and size of frozen water bottles that is needed for a given temperature reduction in the Brew Cooler for 20L beer.One 1-liter bottle reduce 1,5°C.Two 1-liter bottles reduce 3°C.One 1,5-liter bottle reduce 2°C.Two 1,5-liter bottles reduce 4°C.Three 1,5-liter bottles reduce 6°CFour 1,5-liter bottles reduce 8°C.One 2-liter bottle reduce 3°C.Two 2-liter bottles reduce 6°C.Three 2-liters bottles reduce 9°C.Four 2-liter bottles reduce 12°C.These temperature reductions are valid for 20L beer in the fermenter. As can be seen, the temperature reduction is about 1,5°C per liter frozen water. The maximum temperature reduction that can be archieved is about 15°C.Example: If your home ambient temperature is 21°C and you want to ferment 20L ale at 18°C, add one 2-liter or two 1L) frozen plastic water bottle together with your fermenter in the Brew Cooler. Exchange every 24 hours and repeat at least the first 3-4 days during the primary fermentation. If your brew 10L then about half the volume, 1-1.5L frozen water, is enough. What is the correct fermentation temperature?To get your home brew to taste as good as possible its important to control the fermentation temperature. An ale can theoretically be fermented at room temperature, 20-22°C, however it will taste the cleanest when fermented around 18°C, at least the first 3-4 days of fermentation. Lagers should be fermented at 10-12°C. Saisons can be fermented at high temperatures, 20-35°C, depending on the flavour profile you want.Brew Cooler 30L specificationsHeight: 60 cmLength 40 cmWidth: 40 cmMaterial: Tough black polyester Kraftig svart polyester with insulation and a grey water proof inner liner.Carrying strap: The Brew Cooler is equipped with an adjustable carrying strap.

Ferment your beer in stainless conical fermeters just like in professional breweries. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 30L, optimally 20-25L.Brewly CF 30L Conical Fermenter- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 30L capacity (32L to edge)- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" with rotary racking arm with dip tube provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 1/2" stainless steel valve, perfect for yeast dumping and easy cleaning.- Internal volume scale up to 30L- 2 steady stainless steel handles- 3 adjustable legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 33,5cm- Height without airlock: 59 cm, adjustable up to 66cm- Height with airlock: 69 cm, adjustable up to76cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Ferment your beer in stainless conical fermeters just like in professional breweries. Built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice. Build-in thermowell for external temperature sensor probe, for example from a thermostat controlling a pump. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 30L, optimally 20-25L.Brewly CCF 30L Conical Cooling Fermenter with Chiller- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 30L capacity (32L to edge)- 4,7m built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice.- 30cm stainless thermowell for external temperature sensor probe, for example from a thermostat controlling a pump (like Brewly AC-211/TC-320 universal thermostats).- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 1/2" stainless steel valve, perfect for yeast dumping and easy cleaning.- Internal volume scale up to 30L- 2 steady stainless steel handles- 3 adjustable legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 33,5cm- Height without airlock: 59 cm, adjustable up to 66cm- Height with airlock: 69 cm, adjustable up to76cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Ferment your beer in stainless conical fermeters just like in professional breweries. Built-in 13-meter stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice. Build-in thermowell for external temperature sensor probe, for example from a thermostat controlling a pump. Rotary racking arm with dip tube provides very good extraction of beer from above the cone. Perfect for batch sizes up to 60L, optimally 25-55L.Brewly CCF 60L Conical Cooling Fermenter with Chiller- Material: Polished stainless steel (ANSI 304)- Polished seamless inside for maximum sanitary conditions- 60L capacity (62L to edge)- 13-meter built-in stainless cooling spiral chiller with gardena-type connectors for easy connections to a cooling medium of your choice.- 30cm stainless thermowell for external temperature sensor probe, for example from a thermostat controlling a pump (like Brewly AC-211/TC-320 universal thermostats).- Thermometer 0-40C (32-104C) with internal thermowell for the sensor.- Mini valve 3/8" with rotary racking arm with dip tube provides very good extraction of beer from above the cone for bottling or transfer to keg.- Dump valve on conical bottom with 3/4" stainless steel valve, perfect for yeast dumping and easy cleaning.- 2 steady stainless steel handles- 3 legs with rubber feet- Airlock with rubber plug- Stainless lid with lock med heavy-duty silicone seal- Diameter: 47 cm- Height: 70 cm- Multiple fermenters can be stacked on top of eachother- Instructions manual in English

Inkbird WiFi ITC-308 Digital Temperature Controller Outlet Thermostat with Dual Screen Readouts, w/Sensor. For Home Brewing & Fermentation, Breeding & Incubation, Greenhouse, Kombucha.- Plug and play design, easy to use. - WIFI smart controller supports both IOS & Android，WIFI supports 2.4GHz Wi-Fi router, free APP “InkbirdSmart” which is able to monitor temperature at any time.- Support reading with Centigrade or Fahrenheit. - Maximum output load: 1100W(110V) / 2200W(220V). - Temperature calibration, Compressor delay protection for refrigeration control.- High and low temperature alarms are available. - Dual relay output, be able to connect with refrigeration and heating equipment at the same time. - Dual display window, be able to display measured temperature and set temperature at the same time. - Heating/Cooling differential function could be set separately for refrigeration and heating to protect temperature controller from violent change.Specifications- Temperature Control Mode :On/Off Control, Heating and Cooling - Temperature Control Range : -40~100 °C / -40~212 ° F - Temperature Resolution: 0.1 ° C / 0.1° F ​- Temperature Accuracy: ±1°C (-50 ~ 70°C) / ±1°F (-50 ~ 160° F) - Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F- Input Power: 100 ~240VAC, 50Hz/60Hz - Temperature Control Output: Max. 10A, 100V ~240V AC - Input Power Cable Length: 1.5m (5ft) ​- Output Power Cable Length: 30cm (1ft)- Sensor Type: NTC sensor (Including) - Sensor Length: 2m / 6.56ft ​- Sensor's probe dimension: 50mm x 6mm- Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)- Socket (EU Version): 135x54x40mm (5.3x2.1x1.6 inch)

Brewly AC-211 Digital Universal Thermostat. EU-version power cord (UK power cord not included). Can control one Heating source and one Cooling source. Sensor included.

INKBIRD ITC-310T-B is a dual relay thermostat which can be set to automatically control 12 individual temperatures for 12 time slots. It is widely used for homebrew, aquarium, pet breeding, hatching, fermentation, seed sprouting and etc.12 individual temperatures for 12 time slots: INKBIRD ITC-310T-B can be set 12 individual temperatures for 12 time slots. Once the practical temperature reaches its set temperature, its timer will be started automatically, which will be much better and more precise for the monitored creatures and/or plants.Wide application contexts: INKBIRD ITC-310T-B is widely used for homebrew, aquarium, pet breeding, hatching, barbecue, boiler temperature control, geothermal temperature control, heating pump constant temperature cycle, strain culture fermentation, seed sprouting, electric heating, electric oven, over-temperature protection and automatic temperature control system of all kinds of electrical equipment and etc.Flexible control mode: it supports single mode and cycle control mode; we can choose and/or switch the control mode based on our practical needs.Specifications INKBIRD ITC-310T-BTemperature Control Range: -50~120°C/-58~248°FTemperature Resolution: 0.1°C / 0.1°FMeasuring Accuracy: ±1°C (-50 ~ 70°C) / ±1°F(-58 ~ 158°F)Temperature Control Mode: On/Off Control, Heating and CoolingTiming Accuracy: 24 hours±1.7sTiming Range: 1~999 (min/hour/day)Periods of Time Max: 12 periodsCycle Setting: 1-999 times cycle, or 00 infinite cycleInput Voltage: 100 ~240VAC, 50Hz/60HzControl Output Current: Max.10AVoltage: 100~240V ACPower: Max.1200W(120V)/2200W(220V)Alarm: High and Low Temperature AlarmSensor Type: NTC Sensor(including)Sensor Length: 2m / 6.56ftRelay Output: Cooling(10A,100-240VAC)Heating(10A,100-240VAC)

These 29L stainless steel vessels are designed just like a commercial beer keg but with a large 10cm (4inch) tri-clover opening at the top so you can easily get inside the keg to clean it out. This new 29L Size is perfect for doing 20-25L batches so you have a bit of spare head space inside the Kegmenter.This the stainless steel Kegmenter comes with airlock and flat plate however you can also use this kegmenter under pressure if you want to. If you want to use this Kegmenter under pressure then we would recommend that you purchase the lid with ball lock posts and pressure relief vale.The Kegmenter can hold 2.5bar which makes it possible to carbonate and ferment in the same vessel. You can force carbonate using the Pressure Kit (sold seperately).Being able to hold pressure also means you can push the beer out of the fermenter directly through a filter or even dispense directly from fermenter to draft beer tap if you wanted to.SpecificationsVolume: 29L (7.6 Gallons)Maximum Working Pressure: 2.5 BARTest Pressure: 5 BAR Wall Thickness (Body/Chimes): 1.8mm/2.1mmDiameter: 39,5cmHeight: 38cmDatasheetClick here to open the datasheet

The SF70 is our largest and tallest fermenter yet. With a 70L capacity it’s designed to hold big batches of wort after a big brew day. The SF70 can be adapted to suit your brewing space with an adjustable leg height and castor wheels for easy manoeuvrability. Its intuitive design, 304 grade stainless steel build, and 113° angle conical makes both fermentation and cleaning easy. FEATURESSF70 body built out of high grade, 304 stainless steel113° angle conical avoids yeast and sediment getting stuck to the sides of the coneAdjustable leg height and castor wheels for easy manoeuvrabilityEasily dump yeast with a separate valveInsert temperature probes into the built-in thermowell for accurate temperature readingsTransfer and take samples above the yeast and trub line with an accessible valve on the side of the unit Compatible with the GCA for accurate temperature controlWe’re confident that our products will produce professional results, just like the craft breweries. That’s why every SF70 comes with a 2-year warranty.WHAT'S INCLUDED?- Grainfather SF70- Stainless steel lid with 38mm tri-clamp fitting- Rubber bung & airlock- Thermowell (use with GCA or thermometer)- Cone mounted 10mm stainless steel barbed sample valve- 19mm bottom mounted stainless steel dump valve- Adjustable and removeable legs with castor wheelsSize: 1300 x 410mm (including air lock and in highest leg position)Weight: 13kgCapacity: 70LMax fermentation volume: 65LPower: NoneConnectivity: NoneCone angle: 113°

The Grainfather Conical Fermenter Pro Cooling Edition allows you to control the heating of your unit, dump yeast, take samples and transfer your wort via our innovative dual function valve design. Note: EU-version power cord (UK power cord NOT included).The Cooling Pump Kit allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior.Ferment like never before! The Grainfather Conical Fermenter give the brewer professional fermentation control, just like the commercial breweries. Fermentation is arguably the most important part of producing a good quality beer. A good fermentation environment starts with a clean and sterile fermenter, has a consistent controlled temperature base and exposure to oxygen is minimised. The Grainfather Conical Fermenter provides you with a modular system for all of this and more!FEATURES:Double Walled: A stainless steel double walled skin is filled with a thick layer of polyurethane foam for insulation. This is what keeps the wort at a constant stable temperature with minimal influence from any external environmental temperature changes, providing insulation for your fermentation that a standard jacket cannot achieve. Integrated Gentle Heating: In the cavity of the fermenter between the outer body and cone sits a 30 Watt, 12V heating element. Unlike standard heating elements/sources that directly heat the liquid, this heat source is designed to heat the environment in between the walls of the fermenter, which in turn heats the liquid. It is similar to controlling the temperature in a temperature controlled room. The fermenter acts as an artificial environment which can be heated, meaning the temperature is raised in an even and controlled manner which is much better for the yeast. Integrated Cooling Sleeve: In between the two stainless steel walls sits a cooling sleeve (also made of stainless steel). This cooling sleeve is welded onto the inner wall of the fermenter and can be hooked up to the Cooling Pump Kit. Temperature is dialed into the Temperature Controller and as the iced cold water travels through this sleeve, it cools the stainless steel which in turn evenly cools the beer in the fermenter. The cooling sleeve never comes into contact with the beer, it is completely concealed, built into the fermenter and never needs cleaning or sanitising - a true innovation for a fermenter of this scale.Basic Cooling Pump Kit: The Cooling Pump Kit allows users of the Grainfather Conical Fermenter to control the fermentation temperature with cold water by pumping it through the double walled insulated interior.Easy Access to the Interior for Hassle Free Cleaning: The Grainfather Conical Fermenter has a smooth interior with no additions such as cooling coils or additional sampling valves meaning it is easy to clean and minimises the risk of infection.Golden Angle Conical:The conical shape of the fermenter is typical for professional breweries. Our conical has been designed with the 'Golden Angle' of 60º. This is the optimum angle for yeast and sediment to drop down to the bottom of the cone without getting stuck to the sides, allowing you to transfer from above the sediment line, resulting in clearer beer. The conical shape also allows for better mixing during fermentation due to the path of convention currents that it enables to occur. Dual Valve Tap: Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through an inlet above the sediment line, allowing for clear, sediment free beer. Easily collect your yeast from below the sediment line with the same unique valve for recultivating and pitching. The innovative design of the valve allows for this dual functionality and less cleaning for you. Temperature Control: The Temperature Controller easily snaps on via magnets and pogo pins. Allowing you to accurately dial in a temperature and even set a temperature schedule/profile (you can set up to 4 profiles each with 5 stages). It can control the heating of the integrated heating element and the cooling via the Cool Pump Kit. Support: The Grainfather Conical Fermenter is fully supported around the world by a fantastic support team who love brewing just as much as you do. Our support team is here for any technical enquiries on brewing or how the Conical Fermenter works, as well as general customer service enquiries.

 All Grainfather Conical Fermenters come with a 24 month warranty. EU-power plug (UK-plug not included)

Make the yeast dumping, transferring and sampling process more professional with this innovative all in one valve. Sampling and transferring is done through a valve above the sediment line, allowing for clear, sediment free beer. Collect your yeast from below the sediment line for recultivating and pitching. - Dual Valve Tap with 110 mm (4.3”) liquid inlet

Grainfather Pump & Adapter for Conical Fermenter. NOTE! Spare part.