Fermentation

Glass jar 4L with lid and tap with many uses, such as: fermentation of beverages such as Kombucha, for cold beverages such as beer, cider, wine, juice, ice water or lemonade.Note: During fermentation, the lid must be slightly open, with eg. a muslin bag in between. The lid must be opened a little to make the tap work, this is due to that a vacuum is formed in the glass when the lid is on. Must NOT be pressurized.- Capacity: 4 liters- Dimensions (approx.): 27 x 16 x 16.5 cm (HxWxD)- With lid and tap.- Hand wash only.- Not for hot drinks.

Now with Tri-Clover Clamp for easy assembly and disassembly of the conical tank, Butterfly valve and harvesting container. No more difficult and complicated Butterfly valve. Now it is easy and simple to mount Butterfly valve with the Tri-Clover Clamp. See video below.FermZilla revolutionary design simplifies the home brewing process and minimizes the risks of infection and oxidation. Finally, you can brew your beer and dispense directly to bottles or drink it as draft beer – without touching the beer. You can carbonate your beer naturally in the FermZilla, or at your desired pressure with the optional pressure kit and the additional pressure release valve with gauge.Facts:27 L. Conical tankWorking pressure: 2.4 bar (35 psi)FermZilla Tri-Conical Starter kit Gen-3 - 27 L. contains:1 x 27 L. Conical tank with metal neck ring1 x Butterfly valve with Tri-Clover Clamps1 x 3" Tri-Clover Clamp1 x 2" Tri-Clover Clam1 x Reinforced stainless steel frame1 x Lidt with red pressure release valve 2,4 bar/35 psi, 2 x Male Cap Threads, with caps and the possibility to drill 4 ports for accessories1 x  600 ml yeast harvesting container with 2 x Male Cap Threads and caps.1 x Airlock1 x Stainless Steel Handle Assembly1 x Strip Stick On Thermometer1 x Level indicator sticker (Litres and Gallons)1 x Spare O-RingDo not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.Warnings:Please read instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.Do not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.

Now with Tri-Clover Clamp for easy assembly and disassembly of the conical tank, Butterfly valve and harvesting container. No more difficult and complicated Butterfly valve. Now it is easy and simple to mount Butterfly valve with the Tri-Clover Clamp. See video below.FermZilla revolutionary design simplifies the home brewing process and minimizes the risks of infection and oxidation. Finally, you can brew your beer and dispense directly to bottles or drink it as draft beer – without touching the beer. You can carbonate your beer naturally in the FermZilla, or at your desired pressure with the optional pressure kit and the additional pressure release valve with gauge.Facts:55 L. Conical tankWorking pressure: 2.4 bar (35 psi)FermZilla Tri-Conical Starter kit Gen-3 - 55 L. contains:1 x 27 L. Conical tank with metal neck ring1 x Butterfly valve with Tri-Clover Clamps1 x 3" Tri-Clover Clamp1 x 2" Tri-Clover Clam1 x Reinforced stainless steel frame1 x Lidt with red pressure release valve 2,4 bar/35 psi, 2 x Male Cap Threads, with caps and the possibility to drill 4 ports for accessories1 x  1000 ml yeast harvesting container with 2 x Male Cap Threads and caps.1 x Airlock1 x Stainless Steel Handle Assembly1 x Strip Stick On Thermometer1 x Level indicator sticker (Litres and Gallons)1 x Spare O-RingDo not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.Warnings:Please read instructions thoroughly before use. The current version can be found in the 'instructions' tab above. We will not be held liable for misuse or mishandling of the unit contrary to the instructions.Do not expose to liquid temperatures above 55°C / 130°F or ambient temperatures above 35°C / 95°F.

The FermZilla 30L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. Incl. Fermenter body, stainless steel frame, airlock and lid with red pressure relief valve. Pressure rated up to 2.5bar.This kit includes:1 x All rounder tank1 x 304 stainless stand1 x Airlock1 x Pressure rated lid1 x Digital temperature sticker1 x Red 2.5bar pressure relief valve1 x Graduation StickerEasy to CleanThis fermenter is made from super smooth PET so it's easy to clean. Just use s small scoop of Powerful Brewery Wash and wipe it clean after a 5 minute soak. No scrubbing necessary.Large 120mm OpeningThe opening at the top is signficantly larger then the older Snub Nose or other similar fermenters. This bad boy has 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.Pressure RatedThis fermenter is rated up to 2.5bar so you can force carbonate just like a keg. You can use this fermenter for closed transfers and signficiantly reduce oxygen exposure.Crystal ClearThe wall of the All Rounder is crystal clear so you can see what's going on inside. This makes it really easy to determine visually how the fermentation, how the yeast is floculating etc.ImpermeableThe PET plastic is not permeable like some other fermenters made from PP or HDPE. The fermenter wall is a much better gas barrier keeping your product fresher for longer.No Flavour and Aroma Carry OverOther HDPE fermenters tend to be so pourous they carry flavour and aromo from one batch to another. Robust and Difficult to DamageImpossible to smash like glass. The tank is impact resistant but light weight and easy to use.IMPORTANT NOTE: This tank should not be used for hot liquid. Do not put liquids inside this tank over 50C. It will melt the tank. Also this tank comes pressure tested however we recommend that every 2 years you re-hydro test this tank yourself. Please contact us for more information regarding how to hydro test when the time comes.

The FermZilla 60L All Rounder is the perfect fermentation vessel that can be used for fermenting under pressure, carbonating and dispensing. Incl. Fermenter body, stainless steel frame, airlock and lid with red pressure relief valve. Pressure rated up to 2.5bar.This kit includes:1 x All rounder tank1 x 304 stainless stand1 x Airlock1 x Pressure rated lid1 x Digital temperature sticker1 x Red 2.5bar pressure relief valve1 x Graduation StickerEasy to CleanThis fermenter is made from super smooth PET so it's easy to clean. Just use s small scoop of Powerful Brewery Wash and wipe it clean after a 5 minute soak. No scrubbing necessary.Large 120mm OpeningThe opening at the top is signficantly larger then the older Snub Nose or other similar fermenters. This bad boy has 120mm opening so even brewers with large arms can easily get into the top making cleaning even easier.Pressure RatedThis fermenter is rated up to 2.5bar so you can force carbonate just like a keg. You can use this fermenter for closed transfers and signficiantly reduce oxygen exposure.Crystal ClearThe wall of the All Rounder is crystal clear so you can see what's going on inside. This makes it really easy to determine visually how the fermentation, how the yeast is floculating etc.ImpermeableThe PET plastic is not permeable like some other fermenters made from PP or HDPE. The fermenter wall is a much better gas barrier keeping your product fresher for longer.No Flavour and Aroma Carry OverOther HDPE fermenters tend to be so pourous they carry flavour and aromo from one batch to another. Robust and Difficult to DamageImpossible to smash like glass. The tank is impact resistant but light weight and easy to use.IMPORTANT NOTE: This tank should not be used for hot liquid. Do not put liquids inside this tank over 50C. It will melt the tank. Also this tank comes pressure tested however we recommend that every 2 years you re-hydro test this tank yourself. Please contact us for more information regarding how to hydro test when the time comes.

FermZilla Hop Bong is a versatile accessory, capable of pressurized dry hopping and oxygen purged hops into fermenters. And also as an inline carbonation/oxygenation accessory.Capacity in Hop Pellets:150g to 180gNamed purely on its looks and not its function. The Hop Bong is a versatile pressurizable tri-clover accessory, capable of not only dry hopping oxygen purged hops into fermenters. But also as an inline carbonation/oxygenation accessory.This is a completely new pressure pack for the basic FermZilla Tri-Conical and All Rounder Fermenters with the new 2" Tri-Clover Adapted Pressure Lid.Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.Includes:1 x KL05333 Red 35psi PRV1 x KL20176 PCO1881 PRV Cap1 x KL23627 - PCO1881 Male x 2 Inch Tri-Clover (POK)3 x KL03438 - 2 Inch TC Clamp Beaded Seal3 x KL03322 - 2 Inch TC 2 Segment Clamp1 x KL26079 - 2 Inch Hop Bong1 x KL10788 RED Multi Gas Post Plastic Carbonation Cap1 x KL27564 - 2 Inch x 2 Inch Butterfly Valve1 x KL22569 Yellow 17psi PRV1 x KL35965 - 4 Inch TC Pressure Lid with 2 Inch TC PortPlease note that the Hop Bong is not made from glass. It is made from special engineering plastic.

The valve makes it possible to dry hop with a regular soda bottle on a FermZilla. You put some hops in a threaded bottle, attach the valve, and put it onto the lid of the FermZilla. An easy and cheap tool for dry hopping.If you also use a Carbonation Cap T-Piece and a Line Cleaning and Carbonation Cap you will be able to use Co2 to remove the oxygen from the hops.Stainless steel ball valve with a approx. 20 mm bore and O-ring in both ends.

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. This inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all togetherFermZilla Red Plastic Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x FermZilla 27L, 35L & 55L SS Floater & 60cm Silicone Dip Tube

Add this pressure kit to your FermZilla 27L, 35L or 55L and turn your FermZilla into a true uni tank that can be used for carbonating beer. Stainless steel.This inexpensive upgrade will truly show you what the FermZilla was designed for. Here are some possibilities:Fermenting Under Pressure:First one of the most intriguing uses is to ferment under pressure which reduces ester production and fusel alcohol production. That means that you can ferment warmer than you normally would, even making lagers at room temperature. Most commercial beer is fermented under pressure just due to the size of commercial tanks and the pressure that is created by the column of beer. It is one of the differences between commercial brewing and homebrewing. The lid has a built in relief valve that will blow at 35psi and we strongly recommend you also purchase an adjustable pressure relief valve, or blow tie kit, that allows you to set a lower pressure. It is also always a good idea to have two relief valves on the FermZilla anytime the unit is under pressure. Carbonating, Pushing, and Serving:When you are fermenting under pressure the beer is already carbonated when you are done fermenting. You can control the level of carbonation by using an adjustable pressure relief. The idea is that the FermZilla can eliminate kegging and you can serve directly from the fermenter. We love this idea but there will probably still be times that you want to keg. Use a beer line to connect the FermZilla to your keg and enjoy the easiest kegging experience ever. You can also choose to send carbonated beer through a beer filter on the way to your keg. When applying pressure with a CO2 tank also make sure that you have a functional relief valve on your CO2 regulator. Lack of OxidationBecause the beer always has a CO2 blanket through fermentation and during any transfers out, oxidation is eliminated. When you cold crash you won't be sucking air back in through an airlock. Key Features:• Ferment beer under pressure to reduce ester and fusel alcohol production• Ability to always draw clear beer with the unique, floating draw tube • Keg already carbonated beer• Use co2 to push beer into a keg or though a filter into a keg• Carbonate and serve beer directly from the FermZilla, eliminating kegging all togetherFermZilla Stainless Pressure Kit includes:- 2 x Carbonation Screw Caps with barb- 1 x FermZilla 27L, 35L & 55L SS Floar & 60cm Silicone Dip Tube

The filter prevents hop residue etc from beeing sucked up into the silicone hose of the FermZilla Float. Made from HDPE and 304 Grade stainless steel this product can be boiled or sanitized with most detergents.The float can be mounted in three different places on the filter, to determine how close to the surface you want to suck up liquid.Dimensions: 40.5 x 27 mm. Hose holder diameter: 7.20 mm, perfect for 6mm inner diameter silicone tube/hose. Materials: Stainless steel and plastic. design may vary.

FermZilla 60cm silicone dip tube and stainless float. Ensure that only the top layer of beer is poured from the Fermzilla/Fermentasaurus.

Fits CO2/Beer Ball-lock-coupling. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Stainless steel.

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Red plastic. 1/4" (6,5mm) straight stem fits flexible hoses with inner diameter of 5-6mm, or PE-hoses using a pushfit/duotight connector 1/4".

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) straight stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Yellow plastic. 1/4" (6,5mm) straight stem fits flexible hoses with inner diameter of 5-6mm, or PE-hoses using a pushfit/duotight connector 1/4".

Turn your soda bottle into a smart growler quick and easy! Mount either a plastic or metal line cleaning & carbonation cap to the tee piece. Afterwards you are able to connect both a Co2 and liquid ball lock at the same time, so you can take a regular soda bottle and turn it into a growler.Note: This is for the tee piece only, you need to buy the remaining products seperatly.Do not exceed 4,5 Bar/ 65 Psi

Fermzilla chiller. Provides the possibility of temperature control during fermentation using, for example, glycol coolers. Of course, the spiral also fits in other vessels with sufficiently large opening. Are installed by drilling two 22 mm holes in the lid. It is attached using the supplied Duotight bushings. The tube dimension is compatible with 3/8 "(9.5 mm) quick couplings. The length can be reduced by means of a pipe cap. See proposed accessories below.

Thermowell of 60 cm for mounting in the lid of Fermzilla. Inner diameter is 7 mm, enough room for most temperature probes such as Inkbird.

Insulated Jacket for Fermzilla 27L designed to insulate your FermZilla and to obtain a correct temperature.

Insulated Jacket for Fermzilla 55L designed to insulate your FermZilla and to obtain a correct temperature.

This yeast collection container can fit the FermZilla fermenters and is primarily used for collection and addition of hops and yeast via the butterfly valve. NOTE: One yeast collector is already included in the FermZilla Kits.This collection container can also be used for yeast starters meaning that you can create the yeast starter in this collection container directly then attach to the valve of the FermZilla so you can pitch yeast without needing to open the lid. This collection container has been designed to work with the magnetic stirrer machine.The ports on the side of this collection container are the same as a standard coke bottle or soft drink bottle. The threads are designed to suit the stainless carbonation caps. These carbonation caps will enable you to purge oxygen for dry hopping, attach carbonation stone and carbonate liquid in the FermZilla, oxygenate wort and are useful for many other reasons.FermZilla Yeast Collector 1L features:- This collection container fits all the FermZilla conical fermenters.- The clear body is made from Tritan from Eastman Plastics. This heat tolerant plastic is BPA, and plasticiser free.- The Lid is made from impact resistant HDPE.- Both lid and body can handle boiling wort.- Height: 150 mm- Diameter: 115 mm- Capacity: 1L

FermZilla Yeast Collector O-ring Packning. Spare part.

FermZilla Plastic Lid. Spare part.

Fermzilla Lid Ring replacement part.

Spare part. FermZilla Lid Seal O-ring. Fits FermZilla 27L, 35L and 55L.

Fermzilla Conical Valve Assembly with the conical plastic part, conical gasket, O-ring and Threaded lid ring.

Ferminator has changed name to Fercubator. We have taken all the best from Ferminator Basic and made a new version with WiFi and Bluetooth. It is now possible to control your Ferminator online and see current temperatures and settings. In BrewCreator you can enter data about your brew and see all information about your Ferminator Connect. The whole thing is gathered in a nice detailed graph, where you can follow the course of the temperature and see the changes that have been made. Ferminator Connect can also communicate directly with Graviator - a wireless hydrometer measuring directly inside your fermenter (bought seperately). At room temperature (20 °) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process. The height of the Ferminator can be easily expanded with 22cm high expansion modules that are purchased separately. In the Basic version, there is room for, for example, a 30L plastic fermenter or a 30L Fermzilla Flat Bottom. Ferminator Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20 °) the Ferminator can lower the temp. to 0 ° and raise it to 50 ° *. The height can easily be extended with optional 22cm high expansion modules (buy seperately). - The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters. - The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavor notes can be avoided and that the yeast will go into a hibernation state. - The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavor notes and profiles. Cooling / Heating Unit - At room temperature (20 ° C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Ferminator Connect - Dimensions outside: 560 L x 560 B x 651 H - Dimensions inside: 436 L x 436 W x 531 H Size fits: 32 L. Fermenter 30 L. FermZilla Flat Bottom Material Ferminator is made in EPS. Optional Expansion (Not Included, buy it seperately below) Expansion Module The expansion module has a height of 22 cm. The Ferminator can be expanded with several expansion modules an additional cooling / heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space. Note that some product images contain extra equipment not included.

Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Basic- Dimensions outside: 560 L x 560 B x 651 H- Dimensions inside: 436 L x 436 B x 531 HSize fits:32 L. Fermenter30 L. FermZilla Flat Bottom MaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.

Fercubator-Ferminator expansion module

Protects the bottom of the Fercubator-Ferminator. The bottom plate has rounded corners and is made of stainless steel.

Ferminator Top Spare part.

Fercubator-Ferminator Bottom Spare part.

Fercubator-Ferminator Insert for hole Spare part. Fits in the hole where the cooling units normally is in Ferminator Top.

The Fercubator-Ferminator can be expanded with an additional cooling/ heating unit on the back, so you have two units that can regulate the temperature. This is a Ferminator Basic unit.At room temperature (20°) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process.Fercubator-Ferminator Basic Cooling & Heating Unit - At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Note that some product images contain extra equipment not included.

The Fercubator-Ferminator can be expanded with an additional cooling/ heating unit on the back, so you have two units that can regulate the temperature. This is a Ferminator Connect unit which can be connected to WiFi and be controlled online by BrewCreator.We have taken all the best from Ferminator Basic and made a new version with WiFi and Bluetooth. It is now possible to control your Ferminator online and see current temperatures and settings. In BrewCreator you can enter data about your brew and see all information about your Ferminator Connect. The whole thing is gathered in a nice detailed graph, where you can follow the course of the temperature and see the changes that have been made. Ferminator Connect can also communicate directly with Graviator - a wireless hydrometer measuring directly inside your fermenter (bought seperately). At room temperature (20°) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process.Fercubator-Ferminator Connect Cooling & Heating Unit - Wifi & Bluetooth- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Note that some product images contain extra equipment not included.

Upgrade the Fercubator-Ferminator to a fullblood draft beer system with a simple plug and then pour craft beer straight away. Plug & Pour is an easy solution for transforming the Ferminator to a draft beer system with 2 taps.The following is included in Fercubator-Ferminator Plug & Pour Drip Tray - 2 Taps:• Plug & Pour mounting plate• Ferminator Drip Tray• Ferminator Strap• Ferminator Insert• 2 xTaps with flow control• 2 x Shanks• 2 x Ball Locks fluid• 2 x Ball Locks Co2 • Tube for liquid• Tube for Co2• Doutight fittings• T-Piece for Co2

Fercubator-Ferminator Power Adapter with cord to that attached to the Fercubator-Ferminator, and power cord (EU).

The strap holds the top together, ideal if the Ferminator needs to be moved. Can also be ideal when using an extra cooling/heating unit or Plug & Pour.

A wireless hydrometer and thermometer that measures directly in the fermenter, and comminicates to the app BrewConnect via WiFi. It can be used independently in a brewing via WiFi, but the extra smart thing is that it can communicate directly with Ferminator Connect via Bluetooth. This allows a Ferminator Connect to know the exact temperature inside the beer and adjust the temperature even more precisely. The Gravity charger is charged wirelessly via the included wireless charger. It should therefore never be opened, and you avoid the risk of it leaking and destroying a brew. If the Graviator is not charged before brewing, this is not a problem. It can be charged in approx. 5 hours. The improved algorithm in Graviator, the unique design and build quality provide a high accuracy of ± 0.002 SG. The size and weight of the engraver also make it more stable under the crotch.Please observe! The Graviator does not work with steel fermenters.

Graviator Wireless Charger can charge a Graviator of approx. 5 hours. The charger follows the Qi standard and can charge with 5W / 7.5W / 10W. This charger will also work with your phone if it's Qi-enabled.

The RAPT Pill provides accurate real-time density (SG) and temperature measurement and control via the WiFi/Bluetooth integration with the RAPT mobile app/RAPT IOT. Made to measure in your fermenter!RAPT Pill provides accurate specific gravity (SG) and real-time temperature logging and control via wifi/bluetooth. The RAPT pill functions as both a hydrometer and thermometer for real-time gravity testing, enabling instant gravity and temperature measurements and also logs from inside the fermenter during fermentation.The RAPT Pill has many advantages over other wireless hydrometers and thermometers including rugged design, better ergonomics, sanitary design and less prone to errors as a result of hops, krausen or CO2 bubbles generated from fermentation.Specifications:The RAPT Pill is approximately 37mm x 125mm - compact enough to fit almost anywhere!Note:Make sure the RAPT pill is charged for 24 hours before use. This is to ensure that it is fully charged and that the battery is calibrated.When the RAPT Pill is connected via USB-C and connected to wifi, the firmware will automatically update to the current version (if needed). Pill must be connected via USB-C and connected to Wi-Fi to receive firmware updates. What is RAPT?RAPT IOT Hub is a free service where all RAPT-enabled products can both log and store data to the hub where you can conveniently access this data. The RAPT hub can also allow you to remotely control your devices giving you absolute control over your device no matter where you are. The RAPT portal enables you to make complex temperature profiles involving different temperature settings over time, meaning you can start/run a temp profile giving you a set and forget experience. The RAPT portal also controls the alert/notification process for you so that you can receive email notifications if something does not go according to plan.There is no limit to the number of RAPT devices you can connect RAPT IOT Hub. This is unlike other popular wireless hydrometers where you are limited by the number of hydrometers you can connect to an app.Please note: RAPT Pill is fully Wi-Fi and Bluetooth compatible. Currently, it can be fully integrated with wifi. Bluetooth integration will be enabled with a later firmware update.GoogleThe Google Play Android app can be downloaded from the link below.https://play.google.com/store/apps/details?id=io.raptAppleThe Apple App Store RAPT app can be downloaded via the link below.https://apps.apple.com/th/app/rapt/id1573192994"This app is a web mobile wrapper that allows you to browse the RAPT portal/website so that the website is rendered to a mobile device screen increasing the usability on your device. It also gives you the added functionality of push notifications to your mobile device."

Replacement Silicone O-ring for RAPT Pill. It is a good idea to use keg lube to keep these o-rings in the best conditions

Adjustable pressure valve with manometer. Can handle pressures up to 2 bar / 30 psi. 1/4" MFL.

This jacket is designed to insulate your Fermentasaurus during the colder months to keep your fermentation at the optimum temperature. It can also be used with a heating belt/wrap to warm up the wort if the heat from the fermentation isn't enough.Also completely blocks any light/UV to prevent light-struck beer.

Easy-to-use magnetic stirrer with good capacity. Infinitely variable speed and durable plastic construction that can withstand a little spill. Rotatable stand for e.g. thermometer or pH probe included. Stable base with rubber feet. Ultra silence and vibration-free design. Stackable, which saves space during storage.Material: Durable plastic cover.Speed: Stepless 300-2000 rpm.Capacity: 1.5 liters.Power supply: 12V from the included 230V mains adapter.Max Power: 7,2WDimensions: Diameter top 120 mm, max 160 mm. Height 55 mm without stand, 230 mm with stand.Weight: 300 g.Protection class: IP21Accessories: Stand with holder (for probe max 12 mm) included.

Compact magnetic stirrer machine with adjustable speed 0-3600 RPM. Perfect as a yeast starter and propagation of your yeast, up to 3 liters. Power 3W, adaptor with EU-outlet included (12VDC/220V, 1.2m cord). 1pc Magnetic Stir Bar included.Measurements: 12x12cm and 3,2cm heigh.

Tap made in 304 stainless steel that fits most breweries. Rubber covered handle with auto-lock function. 1/2" thread with stainless 1/2" nut and silicone seal. 13mm (1/2") barb at the opening (fits 1/2" hose).

Provides stable stirring action. The PTFE magnetic stir bar work within a wide range of conditions. Smooth, round profile for a wide variety of applications. White PTFE encapsulated Alnico V magnet core. Autoclavable.MeasurementsLength: 40 mmDiameter: 8 mm

PFTE Coated stirr bar magnet without ring for magnetic stirrers. Dimensions: 12x3 mm.

PTFE-coated powerful stirr bar magnet with ring for magnetic stirrers. Dimensions: 27x8 mm.

PTFE-coated powerful stirr bar magnet with ring for magnetic stirrers. Dimensions: 45x8 mm.