Accessories

Adaptor SS304 FPT 1/2" Female to 1/2" Female (Inner Thread). SS304 stainless steel

Bazooka Screen 15cm/6"

Bazooka Screen 30cm/12"

Stainless steel Mesh filter screen for Bazooka 15cm. NOTE! No couplings included, only net/mesh. Fits well on 1/2" thread/pipe with hose clamp (not included). Length: 15 cm (6")Diameter filter: approx. 22 mm

Stainless steel Mesh filter screen for Bazooka 30cm. NOTE! No couplings included, only net/mesh. Fits well on 1/2" thread/pipe with hose clamp (not included). Length: 30 cm (12")Diameter filter: approx. 22 mm

Bazooka T-Screen 2x15cm

Better Brew Beer Paddle 24" 61cm - Designed for especially for Homebrew. Food grade plastic stirring spoon/paddle. This long handle food grade paddle reaches right to the bottom of pretty much all fermentation vessels, barrels, kegs and buckets. An essential peice of kit.

Better Brew Jug Plastic 1L/35oz with scale

Better Brew Jug Plastic 4L with scale

Better Brew 24" 61cm Long Plastic Spoon - Designed for especially for Homebrew. Food grade plastic stirring spoon/paddle. This long handle food grade spoon/paddle reaches right to the bottom of pretty much all fermentation vessels, barrels, kegs and buckets. An essential peice of kit. (It doesn't fit through the neck of carboys and demijohns of course.)

Better Brew Mashing & Sparging Bag is designed to fit most boilers, but not to float free in the boiler, just in case it comes into contact with the element as the element will melt the mashing & sparging bag by Better Brew.This bag has fine mesh all round and its size is approx:Top Width = 54cmBottom Width = 26cmDeep = 35 cmApprox (the bag is tappered) (measurements taken flat on a table).

Better Brew MK4 Wine Filter Kit Housing - for Homebrew Wine, Beer & Cider Making (Housing only - Filter Pads sold separately.). Give your brew a professional, clear finish.This is a gravity fed filter kit. A pump is not required. Use an Extendable Syphon, or just a long PVC tube to achieve the necessary distance (1.5 to 2 metres).Filter Pads and Siphons sold separately.Filter Pads available include:- 2000 - Beer - Allows just a small amount of yeast through for secondary fermentation & carbonisation.- 1000 - Course - Removes most debris.- 500 - Medium - Red wines requiring a robust mouth feel.- 100 - Fine - White wines and Roses.- 000 - Sterile - Removes even the yeast leaving a sterile brew.Instructions:Click here

Better Brew MK4 Filter Pads 2-pack. Beer 2000 Grade allows just a small amount of yeast through for secondary fermentation & carbonisation, fits the Better Brew MK4 Wine Housing. Rinse pads and soak for 5 minutes before use.Filter Pads available include:- 2000 - Beer - Allows just a small amount of yeast through for secondary fermentation & carbonisation.- 1000 - Course - Removes most debris.- 500 - Medium - Red wines requiring a robust mouth feel.- 100 - Fine - White wines and Roses.- 000 - Sterile - Removes even the yeast leaving a sterile brew.Read moreClick here

Better Brew MK4 Filter Pads 2-pack. Coarse 1000 Grade removes most debris, fits the Better Brew MK4 Wine Housing. Rinse pads and soak for 5 minutes before use.Filter Pads available include:- 2000 - Beer - Allows just a small amount of yeast through for secondary fermentation & carbonisation.- 1000 - Course - Removes most debris.- 500 - Medium - Red wines requiring a robust mouth feel.- 100 - Fine - White wines and Roses.- 000 - Sterile - Removes even the yeast leaving a sterile brew.Read moreClick here

Better Brew MK4 Filter Pads 2-pack. 100 Fine Grade for White wines and Roses, fits the Better Brew MK4 Wine Housing. Rinse pads and soak for 5 minutes before use.Filter Pads available include:- 2000 - Beer - Allows just a small amount of yeast through for secondary fermentation & carbonisation.- 1000 - Course - Removes most debris.- 500 - Medium - Red wines requiring a robust mouth feel.- 100 - Fine - White wines and Roses.- 000 - Sterile - Removes even the yeast leaving a sterile brew.Read moreClick here

Better Brew MK4 Filter Pads 2-pack. Sterile 000 Grade removes even the yeast leaving a sterile brew, fits the Better Brew MK4 Wine Housing. Rinse pads and soak for 5 minutes before use.Filter Pads available include:- 2000 - Beer - Allows just a small amount of yeast through for secondary fermentation & carbonisation.- 1000 - Course - Removes most debris.- 500 - Medium - Red wines requiring a robust mouth feel.- 100 - Fine - White wines and Roses.- 000 - Sterile - Removes even the yeast leaving a sterile brew.Read moreClick here

Black Cap 50mm

The Brew Cooler XL is an extra large waterproof, insulated cooling bag to keep correct fermentation temperature in fermenters and kegs up to 30L. Either one 30L fermenter or two cornelius kegs fits inside. Perfect if you dont have space or possibility to place your fermenter in a temperature controlled refrigerator at home.How the Brew Cooler XL worksThe function is simple, place your fermenter or keg(s) inside the Brew Cooler and add frozen water bottles (preferrably plastic) inside the Brew Cooler to reduce and keep the correct fermentation temperature. The volume of frozen water in the plastic bottles determines how many degrees below room temperature the fermenter will be kept at. The frozen water bottles should preferrably be replaced every 24 hours, or when needed.1. Place the Brew Cooler at a suitable location in your home. Place your fermenter with wort inside the Brew Cooler.2. Place the correct number of frozen water bottles inside the Brew Cooler according to the Temperature Chart below.3. Close Brew Cooler zip locks.4. After 24 hours, exchange the frozen water bottles for new ones.Temperature Chart: Choose the correct fermentation temperatureThis chart gives examples of the number and size of frozen water bottles that is needed for a given temperature reduction in the Brew Cooler for 20L beer.One 1-liter bottle reduce 1,5°C.Two 1-liter bottles reduce 3°C.One 1,5-liter bottle reduce 2°C.Two 1,5-liter bottles reduce 4°C.Three 1,5-liter bottles reduce 6°CFour 1,5-liter bottles reduce 8°C.One 2-liter bottle reduce 3°C.Two 2-liter bottles reduce 6°C.Three 2-liters bottles reduce 9°C.Four 2-liter bottles reduce 12°C.These temperature reductions are valid for 20L beer in the fermenter. As can be seen, the temperature reduction is about 1,5°C per liter frozen water. The maximum temperature reduction that can be archieved is about 15°C.Example: If your home ambient temperature is 21°C and you want to ferment 20L ale at 18°C, add one 2-liter or two 1L) frozen plastic water bottle together with your fermenter in the Brew Cooler. Exchange every 24 hours and repeat at least the first 3-4 days during the primary fermentation. If your brew 10L then about half the volume, 1-1.5L frozen water, is enough. What is the correct fermentation temperature?To get your home brew to taste as good as possible its important to control the fermentation temperature. An ale can theoretically be fermented at room temperature, 20-22°C, however it will taste the cleanest when fermented around 18°C, at least the first 3-4 days of fermentation. Lagers should be fermented at 10-12°C. Saisons can be fermented at high temperatures, 20-35°C, depending on the flavour profile you want.Brew Cooler XL 30L specificationsHeight: 70 cmLength 40 cmWidth: 40 cmInternal supports: 60cm Vertical rib supports keeps the bag upright by itself.Material: Tough black polyester with insulation and a grey water proof inner liner.Carrying strap: The Brew Cooler is equipped with an adjustable carrying strap.Note: Fermenters, kegs or other accessories are not included.

The Brew Kit 25L is the perfect when you want to brew wine, cider or mead at home - we've put together the things you need to start - just add bottles and an ingredient kit of your favorite type.NOTE: Does not contain bottles or ingredients.

Brewers paddle 52cm made from food grade plastic.

Brewly AC-211 Digital Universal Thermostat. EU-version power cord (UK power cord not included). Can control one Heating source and one Cooling source. Sensor included.

Brewly Blue Rubber for Tap. Spare part.

Brew Bag 10L is a strong nylon bag for BIAB (Brew-In-A-Bag). Measures 55x35cm. Fits most kettles between 5-15L up up 30cm in diameter. Easy to clean. Nylon is stronger than polyester, which many other BIAB brew bags are made of.Length: 55cmDepth: 35 cmMaterial: Nylon, BPA free.Note: Kettle is not included. This is the same Brew Bag that is included in The Home Brewery's 10L Receipe Kits.

Brewly Brew Bag 40L is a strong nylon bag for BIAB (Brew-In-A-Bag). Nylon is stronger than Polyester, which many other brew bags are made of. Measures 55x75cm. Fits most kettles between 10-40L up to 35cm in diameter. Easy to clean.Length: 55cmDepth: 75 cmMaterial: Nylon, BPA freeNote: Kettle is not included.

Refractometer with Automatic Temperature Correction (ATC) and dual scales: 0-32°Brix and up to SG 1.130.

Brewly Racking Arm for Conical Fermenter with 2pcs silicone o-rings with 9mm outer diameter and 6mm inner diameter, thickness ca 1,5mm.

Brewly Seals 10-pack for Carbonation Caps & Ball Locks

Tap made in 304 stainless steel that fits most breweries. Rubber covered handle with auto-lock function. 1/2" thread with stainless 1/2" nut and silicone seal. 13mm (1/2") barb at the opening (fits 1/2" hose).

Brewolution Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Suitable for breweries, pots and kettles up to 40L. Fits 3/8" pushfit fittings, perfect for hose with 3/8" (9,5mm) outer diameter. Fittings and hose not included.Diameter 25 cm.Height 37 cm.

Brewolution Chiller 16 meters (3/8" tube) in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Suitable for breweries, pots and kettles up to 70L. Fits 3/8" pushfit connectors, perfekt for hose with 3/8" (9,5mm) outer diameter. Fittings and hose not included.Diameter 30 cm.Height 53 cm.

Crown Caps 75-pack Black 26mm

Blue Metallic Crown Caps 75-pack 26mm

Purple Metallic Crown Caps 75-pack 26mm

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Red plastic.

Fits CO2/Beer Ball-lock-coupling and has 1/4" (6,5mm) straight stem. Sanitize hoses or force carbonate beer on PET Bottle. Also fits FermZilla. Clean your beer line easy. Attach the cap to a soda bottle with cleaning solution. Liquid and Gas ball lock compatible. Yellow plastic.

Chemipro-Oxi Sanitizer

Coobra VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 350L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.

Cooling Spiral 15m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quick Connect garden hose connectors.Spiral tube diameter: 10 mmTotal diameter: 24 cmTotal height: 69 cmThreads: 3/4-inch (fit 3/4-inch Gardena-style garden hose connectors.)

Cooling Spiral 5m 3/4-inch Quick Connerctor compatible.Spiral diameter: 200 mmSpiral tube diameter: 10 mmSpiral height: 90 mmTotal height: 400 mm Max recommended kettle depth: 450 mmFittings: 3/4" for gardena

Cooling Spiral 7,5m in stainless steel for faster cooling of the wort. The fittings fit 3/4-inch Quck Connect garden hose connectors.Spiral tube diameter: ca 10 mmSpiral height: ca 90 mmTotal height: ca 400 mmTotal spiral diameter: ca 255 mmThreads: 3/4" (fit 3/4-inch Gardena-style garden hose connectors)

Five Star pH 5.2 Stabilizer 450g

Hexagon Double Nipple NPT 1/2" to NPT 1/2". Stainless steel. Fits amonst other things Lauter-Helix 1000mm.

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 18cm. Diameter: 7cm. Mesh size: 300 microns

Hop filter in stainless steel, perfect for dry hopping beer in Cornelius kegs or fermenters. Loop for hanging it. Length: 29cm. Diameter: 7cm. Mesh size: 300 microns

Brand new Hop Sock design, suited for dry hopping or steeping hops in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime. This can also be used to steep malted grain, or literally anything you need to use like a tea bag. Re-usable, we recommend soaking in a Sodium Percarbonate mixture then a machine wash. Customise your hop sock with this "Tie The Knot" Hop Sock, cut it in half, thirds, fourths. Then simply tie the end, bag up your hops/spices tie again and drop them into your boiler, fermenter or even a modified radler. This can also be used to steep malted grain, or literally anything you need to use like a tea bag. Dimensions:150mm wide800 mm long (we recommend cutting in half and tying each end like a sack, or use as long tube) Tip and tricks, tie hops with double the amount of space like a half empty sack (expansion/absorption). Then tie unscented floss to the end and hang with a clip/clamp in your boiler/kettle or fermenter. Keeps it from touching the bottom and clogging ball valves or pumps.

Brand new Hop Sock design with far stronger stitching all the way around. Suited for dry hopping or steeping grain or spices in the boil. If you have a Heat Exchanger, we would highly recommend bagging your hops if you're going to do a NEIPA or DIPA, as it may clog your plates or even your pump! Rated up to 110C it is the perfect tool for an easier clean up regime. This can also be used to steep malted grain, or literally anything you need to use like a tea bag.  Dimensions:130 x 580 mm

Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 300 micronsTotal length: 46cmLength of mesh basket: 35cmDiameter top: 15cmDiameter bottom: 10cm

Juice Strainer with removable polyester strainer cloth. Perfect for filtering out hops and wort trub. Fits most fermenters and kettles around 30cm in diameter. Easy to clean after use.

Juice Strainer with removable strainer cloth. Perfect for filtering out hops and wort trub. Fits most fermenters and kettles around 30cm in diameter. easy to clean after use.

Juice Strainer Bag

Juice Strainer Metal with removable strainer cloth. Perfect for filtering out hops and wort trub. Fits most fermenters and kettles around 30cm in diameter. Easy to clean after use.

High Quality Polyester Bag 63 micron mesh with 25mm Webbing. These polyester bags are strong and resilient! Made to line a pot up to 55cm in Diameter, the bags actual dimensions are 800mm wide by 550mm deep and are suitable for boiling as well up to 110C.

Top-shelf polyester brew in a bag (BIAB) featuring 65-micron mesh with 1-inch reinforced Webbing.  70cm x 85cm. BIAB - top-shelf polyester brew in a bag (BIAB) featuring 65-micron mesh with 1-inch reinforced Webbing.  The bags are 70cm x 85cm making them large enough to use in even pots that are 60 litres and over! Suitable for boiling as well up to 110C.

This awesome compact solution for adjusting water and gas pressure can be useful in many different applications.  With Manometer 0-10 bar (0-150 psi). This can be used for compressed air, CO2, nitrogen, mains water supply and many other things.The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals. These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing.  For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate.Suits pressures 0-150psi (0-10 bar)Suitable for mains water pressureSuitable for liquid or gasMade from Acetal/POM, EPDM o-rings and stainless teethSuits 6.35mm (1/4") OD Tubing such as our Evabarrier TubingIncludes integrated manometer 0-10 bar (0-150 psi) Pressure Gauge

This awesome compact solution for adjusting water and gas pressure can be useful in many different applications.  With Manometer 0-4 bar (0-60 psi). This can be used for compressed air, CO2, nitrogen, mains water supply and many other things.The unit is made from food grade engineering plastic, stainless steel and quality made EPDM seals. These compact inline regulators have been designed to suit 8mm (5/16") Evabarrier Tubing.  For higher pressures such as mains water supply we recommend the 4mm ID Tubing here or 5mm ID here if you do not need as high pressures and you would prefer higher flow rate.Suits pressures 0-150psi however this unit is packed with the 0-60psi (0-4 bar) gauge as standard.Suitable for mains water pressureSuitable for liquid or gasMade from Acetal/POM, EPDM o-rings and stainless teethSuits 8mm (5/16) OD Tubing such as our Evabarrier TubingIncludes integrated manometer 0-4 bar (0-60 psi) Pressure Gauge

Upgrade your 65L BrewZilla Gen 4 with the all new barbed magnetic driven pump. This pump comes standard with the 100L BrewZilla Gen 4. This model was once a Green Demon (Green Colour), it has now been switched over to a Grey Goblin (Gun Metal Grey Colour). To upgrade the 65L BrewZilla Gen 4, you will need to perform some light electrical terminal rewiring. This pump comes prefitted with blade and circle connectors to swap out the standard 6 watt pump. You will need to re-use the grommet fitting so be gentle when taking it off the 6w pump. Please see product photos for particular configurations, standard config using ball valve, or Oli's Hail Mary configuration (braided hosing sold separately). Standard Configuration - No additional fittings/hoses requiredThis configuration is a direct swap out of the 6w pump to the 25w pump. Utilising the tee splitter and the original hosing that comes with the 65L Gen 4 BrewZilla.It does help a little bit if you use the outlet elbow piece on the inlet, and vice versa as the 25w pump is slightly taller than the 6w stock standard pump. Alternative Configuration ~ Oli's Hail MaryFor this method you will need about a 165mm piece of 12mm ID hosing, preferably braided. You cannot use normal silicone hosing for this. This method does not use the tee piece of ball valve. It solely relies on the bigger 25w pump to do all of the transferring/recirculating needs.Please see product photos for configuration types. This pump can also be used around your brewery, but you will need an electrician to fit a 10a plug to it. Capable of withstanding temperatures up to 120C it can handle the boil directly without the need to cool before use. Extremely efficient 1.1amp pump which can be run continuously at elevated temperatures.  Specifications:Voltage: 220-240 at 50-60hzMax Head: 3.4mMax Flow: 19L/minWiring: Fork and Ring Connectors fitted with insulation sheath.Fittings: 13mm Male BarbNOTE: Like almost all centrifugal pumps, do not run this pump dry.

This 10 cm handy spring clamp has been the tool of choice for many KegLand employees to hold the malt pipe silicone hose in place during the mash. This clamp features a heavy-duty muslin spring which ensures your silicone hose never accidentally pops out of your mash tun and spills your prescious nectar over your brewery floor. It features rounded handles for a comfortable grip and a PE end grip to ensure your hosing is kept secure. This clamp is made from PP and PE which have good chemical resistance so it will stand up to the task for use around common brewing cleaners and sanitisers. These spring clamps have a multitude of potential uses throughout your brewing outside of securing silicone hosing.

The KegLandHeat Resistant Gloves / HIZO Oven Mitts are as impressive as they are functional with the ability to handle contact with temperatures of up to 500° Celsius (932°F). NON SLIP. This means that it is perfect for use with oven baking, hot pots, grilling, barbecuing, and woodstoves. Fashioned with high-quality aramid fibers which work to insulate and protect hands from burning temperatures, these gloves have a comfortable cotton and polyester lining which allows for breathability to resist sweating and a gauntlet-length style of design to protect wrists and forearm from scorching heat as well. These gloves are thick to provide excellent thermal protection and durability, but they are lightweight for extended use without fatigue. Sizing: Medium - sorry sausage finger friends :( hopefully a Large and XL to come soon. With heat resistance up to 932F (500C°), these gloves are perfect for: Perfect for oven baking, hot pots, grilling, barbecuing, and woodstoves.Adjusting logs in the fireplaceTouching scorching hot utensils or food while boiling or fryingChanging light bulbsHigh-quality aramid fibers for insulation and cotton and polyester liningDesigned for mobility and flexibility in mindFood-grade silicone layerMachine-washable, and can be easily hung on the line to dry.

Achieve quick and fast gravity readings of your homebrewing in three specific scales at high ranges, SG Sugar, BRIX and SG Wort. Getting fast, accurate, and reliable readings during all-grain brewing is essential to getting the best possible efficiencies. Refractometers help you achieve this and can speed up your brew day significantly. Now in a water-resistant design that is rechargeable! This model also features ATC (automatic temperature compensation). This high-quality refractometer is extremely accurate and easy to use and calibrate. Calibration is simply done with a few drops of distilled water and the use of a flat head screwdriver. Comes with:Carry caseRed Magnetic Charging USB Charging Cable (AU plug not included) Calibrate Steps:1. Add 10 drops of clean filtered water (preferably deionised water) to the refracted sample end of your Refractometer. 2. Either in direct sunlight or using the LED, observe the blue shaded area. Does it read 1.000? If it is higher or lower, you will need to use a flat headed screwdriver and adjust the underside of the Saber Refractometer so that it reads 1.000.

Lauter-Helix 1000mm is a stainless steel , flexible spiral filter tube made to filter the vort from hops and debris between brewery/kettle and fermenter. Easy to clean by hnd or dish washer. Fitting: NPT 1/2".Can replace the bazooka filter in Coobra CB3 and CB5 together with a "Hexagon double nipple connector NPT 1/2" to NPT 1/2" which is sold seperately. May also fit other breweries.

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Plastic Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RMCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Powerful and quiet 19L/min magnetic pump capable of handling water/wort up to 140°C. Perfect for recirculating wort or drinking water. Stainless Steel Head.Do not run the pump dry.Specifications Magnetic Pump MP-15RM Stainless Steel HeadCapacity: max 19 L/min (60Hz)Head: max 3,4 meters (60Hz)Power rating: 10WConnections: 1/2" BSP threaded males on both input and outputVoltage: 220-240V (50-60Hz)Protection: Class BPower cable: C13-plug (EU-version power cord (UK power cord NOT included))Note: Do not run the pump dry

Malt Scoop Stainless Steel

The heat pad ensures constant brewing temperature which is crucial for the success of brewing beer, wine or spirits. To be placed under the fermenter. Suitable for fermentation in cold areas such as in a refrigerator or in the basement, garages or on the balcony. Provides a low constant heat to the fermenter which aids yeast activity and helps avoid stuck fermentations.Use preferrably in cojunction with an Universal Thermostat (not included).Features:- Inexpensive to run. - Voltage: 220-240V EU-version power cord (UK power cord NOT included).- Power: 25W- Width: 32 cm- Length: 32 cm

Mash Grid 255mm

Nylon mesh bag 20x20cm

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x148 mm (each label)- 4 labels per A4 sheet- Total 100 pcs A4 sheets- Total 400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x37 mm (each label)- 16 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1600 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x42,3 mm (each label)- 14 labels per A4 sheet- Total 100 pcs A4 sheets- Total 1400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x48 mm (each label)- 12 labels per A4 sheet- Total 100 pcs A4 sheets- Total 1200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Bottle labels in 40-pack on A4 sheets. 8 white paper labels with glue per A4. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable by soaking the glass bottles in hot water for 15 minutes.Link to Word templateDownload the template for Word hereUse the Word template to design your labels.Link to PDF templateDownload hereUse this template to design your labels in for example Adobe Photoshop or Illustrator.Label MeasurementsWidth: 105 mmHeight: 74 mmNote that they are harder to remove from PET- and plastic bottles

Multi-Purpose labels in 800-pack on A4 sheets. 8 white paper labels with glue per A4. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they are harder to remove from PET and plstic bottles.Link to Word templateDownload the template for Word hereUse the Word template to design your labels.Link to PDF templateDownload hereUse it to design your own labels in for example Adobe Photoshop or Illustrator.Label MeasurementsWidth: 105 mmHeight: 74 mm

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 199,6x143,5 mm (each label)- 2 labels per A4 sheet- Total 100 pcs A4 sheets- Total 200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 199,6x289,2 mm (each label)- 1 label per A4 sheet- Total 100 pcs A4 sheets- Total 100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 210x148 mm (each label)- 2 label per A4 sheet- Total 100 pcs A4 sheets- Total 200 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 210x297 mm (each label)- 1 label per A4 sheet- Total 100 pcs A4 sheets- Total 100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 52,5x29,7 mm (each label)- 40 labels per A4 sheet- Total 100 pcs A4 sheet- Total 4000 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. Note: No round edges on the labels.Specification- 63,5x33,9 mm (each label)- 24 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. Note: No round edges on the labels.Specification- 63,5x38,1 mm (each label)- 21 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. Note: No round edges on the labels.Specification- 63,5x46,6 mm (each label)- 18 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1800 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x25,4mm (each label)- 33 labels per A4 sheet- Total 100 pcs A4 sheet- Total 3300 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x36mm (each label)- 24 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2400 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 70x41mm (each label)- 21 labels per A4 sheet- Total 100 pcs A4 sheet- Total 2100 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles. NOTE: No round edges on the labels.Specification- 99,1x33,9 mm (each label)- 16 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1600 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Muslin bag 1-pack

Muslin bags 10-pack

NukaTap Mini & FC (Gen2) Self Closing Tap Spring. This Nukatap mini & Nukatap FC spring is designed to suit all Nukatap Mini taps and also the Nukatap FC tap.  This custom made 304 grade spring size is designed specifically to ensure your Nukatap stays closed when it should. Simple let go of the tap handle and the tap will snap shut and prevent accidentally leaving the tap on and emptying the keg onto the floor. This handy inexpensive devices suits all Nukatap Mini and Nukatap FC taps and shank combinations.

The NukaTap Mini is designed for home brewers and portable draft systems, offering a controlled flow rate to reduce foaming and ensure a smooth pour. Its compact size makes it ideal for mini keg setups, fitting easily into tight spaces like domestic fridges.NOTE: Tap only, for connection kit, see below. Key FeaturesForward Sealing Technology: Ensures sanitary operation and reduces maintenance.Superior Laminar Flow: Minimises beer wastage and foam.Durable Construction: Made from robust POK and Santoprene® materials.Low First Pour Foam: High insulation properties keep the tap cool.Versatile Installation: Easy to set up and compatible with various systems.Experience the perfect pour every time with the NukaTap Mini, combining innovative design with practical functionality for all your brewing needs.For measurements, see images. Most conventional beer taps are designed with 10mm diameter nozzle/spout so you can pour pint in just over 10sec.  This type of flow rate is great for high turnover bars and commercial venues but this high flow rate requirement is not not necessary or desirable for all applications.  For compact portable systems, or for home brew draft systems a slower flow rate is easier to control the flow and further reduces foaming issues due to the low liquid volume stored in the tap body.  This Nukatap mini is also more idea for pouring smaller doses.  For examples cocktails where 150-250ml of liquid is dispensed is difficult to control with a high flow rate tap.  For portable systems this tap and FC ball lock disconnect assembly is small enough to literally put in your pocket making it ideal for mini keg setups that you want to be portable or that you want to easily fit inside a domestic fridge where space is tight.

This duotight 8mm (5/16") adaptor is designed to suit the Nukatap Mini and will allow couple your Nukatap mini to a wide range of other 8mm(5/16") duotight fittings or alternatively be able to attach to a Duotight Flow Control Ball Lock Disconnect. This particular type of flow control ball lock disconnect includes a "tang" at the top of the push in fitting that couples with this adaptor.  The combination of the two fittings prevents the tap spinning around while in use. Note: kit contains no Nukatap or ball lock disconnect.

NukaTap Mini Wall Mount Shank Kit - Duotight Adaptor 8mm (5/16"). Note: kit contains no Nukatap or ball lock disconnect.SPECIFICATIONSBeer Line Diameter: Suits any EVABarrier beer line in with 8mm ID Beer line such as the 4mm x 8mm EVABarrier beer line or the 5mm x 8mm EVABarrier beer Line.Collet and Screw Cover: 304 Grade Stainless SteelO-ring Material: Dual o-ring Silicone/EPDM combinationPlastic Mounting: POKTemperature Range: -10C and up to 100CMax Pressure: 150psi

Graded and food-grade plastic can of the highest quality. Neutral translucent colour.Plastic container 5L incl. CapVolume: 5 liters with M40 white or black screw cap.Material: polyethylene (HDPE)Width: 12 cmDepth: 18 cmHeight: 30 cm

9-PACK. Graded and food-grade plastic can of the highest quality. Neutral translucent colour.Plastic container 5L incl. Cap 9-PACKVolume: 5 liters with M40 white or black screw cap.Material: polyethylene (HDPE)Width: 12 cmDepth: 18 cmHeight: 30 cm

Plastic Head for Magnetic Pump MP-15RM (spare part).

Quick Disconnect O-ring Silicone 21x15mm

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume1000 ml / 34 fl.oz

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume250 ml / 8.5 fl.oz

Sanipro Rinse is a foaming, environment friendly, anionic acid based final rinse for sanitizing equipment. It is odour free, tasteless, does not leave any spots, and contains a corrosion inhibitor that makes it ideal for stainless steel and sensitive surfaces. The self foaming action allows the product to get in everywhere and do it's job. Stable across a very wide temperature range. Use it as a final rinse - rinsing with water afterwards is not necessary or recommended. Just let air dry. Tip: Always have a spray bottle pre mixed with diluted Sanipro at hand.Made in Sweden.Dosage1 cap (12,5 ml or 0,5 fl.oz) per 10 liters of water.Recommended contact time is at least 1 minute.Volume5000 ml / 169 fl.oz

Screw Cap for 5L plastic container 5L, white or black. Note: Container/can is not included.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Extra nylon cloth strainer bag for Juice Strainer Metal. Easy to clean after use.

The Brew Kit 25L is the perfect complement to your automatic brewery - we've put together the things you need to start brewing. Just add bottles and Recipe Kits (ingredients).Brew Kit 25L contains:- 25-liter (30L max) fermenter with med tap och lid- 25-liter (30L max) fermenter with lid (no tap)- Fermenter air lock- Bottle filler (fits the fermenter tap)- Automatic pump siphon 44cm (Note: without holder and clamp)- Bench Capper Better Brew- Mash Paddle 52cm- Thermometer- Bottle Washer Spin Mini- SanitizerNote: Does not contain bottles or ingredients.

Classic brewing thermometer made of glass. Scale is -10 till 110 degrees celcius. 30cm in length.

Thermometer Floating

Thermometer LCD 0-30 degrees. XL model length 21,5cm and height 2,5cm. Measurement range 0-30 degrees C.

Thermometer LCD 2-36 degrees Celcius. Self-adhesive. Perfect for the fermenter. Size: 21x148 mm.

White Thread Seal 15mm wide and 12 meters on the roll.

VWP can be used to clean and sanitize all types of home brewing equipment. 100g is enough for up to 110L. Needs to be rinsed off with water after use. Alternative to cleaners such as PBW.This sterliser comes in a sturdy tub and contains the steriliser in a white powder, its as simple as adding a level teaspoon to your primary fermentation bucket and filling it with some water, add all your equipment to the bucket and leave to sit in the solution for approx 15 minutes, rinse and that's it ready for use

A 'Wine/Beer Thief' is the ideal solution for sampling your beer/wine in a quick and easy way. You can even use it as a measuring cylinder! Made from crystal clear plastic giving you the possibility to evaluate the colour/ clarity and to read your hydrometer. Closes automatically, so no difficult finger exercises! 50 cm long for easy and automatic filling without the need of suction. Hydrometer is not included.

Wyeast Nutrient Blend 42g

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 120 mmHeight: 170 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and is not included.

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 160 mmHeight: 220 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and is not included.

Practical Zip-lock bag with zipper (zipper bag) in food-approved, clear and tear-resistant 60um Polyethylene plastic. Easy to open and close with the zipper, and no problems with opening and closing as with regular zip bags without a zipper. 100% Recycleable.Perfect for storing products, food, malt, hops, etc.Opening (with Zip-lock): 225 mmHeight: 310 mmSee image to the right for reference to Opening and Height.Products in the bag are for illustration only and not included.

Better Brew MK4 Filter Pads 2-pack. Medium 500 Grade for red wines requiring a robust mouth feel, fits the Better Brew MK4 Wine Housing. Rinse pads and soak for 5 minutes before use.Filter Pads available include:- 2000 - Beer - Allows just a small amount of yeast through for secondary fermentation & carbonisation.- 1000 - Course - Removes most debris.- 500 - Medium - Red wines requiring a robust mouth feel.- 100 - Fine - White wines and Roses.- 000 - Sterile - Removes even the yeast leaving a sterile brew.Read moreClick here

Food grade HDPE plastic bottle of the highest quality. Neutral, natural plastic color (slightly transparent). Including black 28mm screw cap (cap).Diameter: 82.5mmHeight: 255mmMaterial: HDPE plasticCap Dimension: 28mmVolume: 1000mlWeight: 50gStandard Color: Uncolored.Screen printing: YesVolume Gradation: No

Brewly Chiller 13m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible (as in image). Suitable for breweries, pots and kettles up to 70L. Cooling Spiral length: 13 metersSpiral diameter: ca 25 cmSpiral height: ca 35 cmTotal height: ca 52 cm

Brewly Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Includes Quick Connectors (3/4-inch) that are Gardena system-compatible.Suitable for breweries, pots and kettles up to 40L.Spiral diameter: ca 25 cmSpiral height: ca 25 cmTotal height: ca 39 cmCooling spiral length: 8,8 meters.

Brewolution Fittings and tubes Kit for Chiller 40 and 70. 2 x Fittings connector 3/8”, tap adaptor, tap connector and 2 x 1,5 m. tube is included.

Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 310 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm

Bulldog Mash Paddle in 304 Stainless Steel. 61cm in length.

Coobra Mash Paddle in 304 Stainless Steel. 60cm in length.

A 'Wine/Beer Thief' is the ideal solution for sampling your beer/wine in a quick and easy way. You can even use it as a measuring cylinder! Made from crystal clear plastic giving you the possibility to evaluate the colour/ clarity and to read your hydrometer. Closes automatically, so no difficult finger exercises! 50 cm long for easy and automatic filling without the need of suction. Hydrometer is not included.Weight 0.08 kgLength 58.2 cmHeight 3.5 cmWidth 10.2 cm

This is a simple, reliable and efficient magnetic stirrer for up to 5L flasks. Excellent speed precision. Remains cold even after several days of continuous use. Ensures a high resistance to chemical agents. - High Reliability- Control panel is shielded from liquid spills- Epoxy-coated tough steel casing- Long life operation- Accepts up to 5 liter flasksFeatures- Pale surface for visualization of particles and color changes- Remains cold, even after days of continuous use- Specifically designed for microtitration- Excellent speed control, even at low speed- Simple & Practical- Precision speed regulation up to 1100rpm- Universal mains voltage / frequency range- Light weightTechnical data: Fisher Scientific Microstirrer Magnetic StirrerHeight: 48mmWeight: 0.55KgSpeed: up to 1100RPMMaterial: Epoxy, MetalSpeed Control: Excellent speed control even at low revolutionsSize: 48 H x 120 W x 128 DmmWattage: 0.6WWidth: 120mmVoltage: 100-240VHertz: 50/60HzElectrical Requirements: 100 to 240V, 50/60Hz, 0.6W

Five Star pH 5.2 Stabilizer 113g

Grainfather Magnetic Pump MP-10RN with C14 plug. Original. Standard 14mm input/output.

Whirlpooling and aerating is good practice before you pump the wort out of your brewing system. It infuses oxygen which promotes enhanced yeast activity and places the hops and protein back into suspension before the filtering process. The Grainfather Whirlpool and Aeration Brewing Paddle provides an excellent whirlpool by allowing the perfect amount of liquids and solids to pass through its large blades. Just simply attach to a standard electric power drill via its ‘chuck bit’ styled end for relaxed aeration of your wort. Grainfather Whirlpool and Aeration Paddle:- 304 stainless steel, 8mm (1/3”) drill bit end and 12.5 cm (5”) wide blades- Designed to be easily attached to a power drill via an 8mm (1/3”) drill bit style end- Plugged at the end- 56cm (22”) long, perfect for use in large boilers and smaller stove top kettles- 12.5cm (5”) wide blades to create a strong aeration and whirlpool

Jonas Juice Strainer Bag with polyester weave.

Heavy duty brewing gloves, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots. Heavy Duty Vulcanized Latex Brewing Gloves - 55cm LongThese heavy duty brewing gloves are made from vulcanized latex, ideal for cleaning around the brewery or even the home. Seriously long for getting those arms deep into Kegmenters, Fermentasaurus' and those Large and In Charge Brew Pots.Tough chemical resistant material provides good protection to your hands during clean-up and sanitary handling of equipment.  55cm long so will also protect the forearm when reaching into harsh cleaning chemicals.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Specification- 105x57 mm (each label)- 10 labels per A4 sheet- Total 100 pcs A4 sheet- Total 1000 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Multi-Purpose labels on A4 sheets. White paper labels with glue on the back side. Makes it easy to design and print your own labels at home using an ink- och laser printer. Easily removable from glass by soaking them in hot water for 15 minutes. Note that they may be harder to remove from PET and plastic bottles.Round corners.Specification- 38,1x21,2 mm (each label)- 65 labels per A4 sheet- Total 100 pcs A4 sheet- Total 6500 labelsLink to Word templateDownload the template for Word below under 'Downloadable Files'Use the Word template to design your labels.

Muslin boiling bag 100-pack

Pot 12L with lid&scale

Protafloc is a clarifying agent based on Carragenan (the active sunstance in Irish Moss). Dosage 2-3g per 100L. Add 15 minutes before end of boil.Weight: 40g

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.

Star San is a high foam, final acid anionic rinse for sanitizing equipment. It contains a blend of phosphoric acid and dodecylbenzenesulfonic acid. This synergistic blend is unaffected by excessive organic soils.Star San is also a self-foaming acid anionic detergent. It can be applied through a foamer to produce self-adhering foam or manual application. Cleaning with Star San on a daily basis will leave equipment in an acid condition that will eliminate water spotting, mineral build-up, and corrosion. Dosage: 15 ml per 10 liters of water.Contact time: 3 minutes.