Keggning

Isolation Jacket for Cornelius Keg 18-23L. Neoprene.Note: Cornelius keg is not included.

A complete keg kit without keg, includes sodastream regulator,  gas bottle etc. The kit contains the following products:

Keg kit 1 is a complete barrel kit with gas bottle included. The kit contains the following products:

Keg kit 1 is a complete barrel kit with gas bottle included. The kit contains the following products:

This kit has been designed for simplicity and ease of putting together. If you want to control the pressure retained in a pressure vessel that is releasing pressure then the BlowTie Diaphram Spunding Valve is the tool for the job. The adjustment knob on the top of the unit makes it easy to increase and decrease the set pressure. This BlowTie unit can be easily dissassembled for cleaning using a phillips head screw driver. Designed to suit 8mm (5/16") Evabarrier Tubing.  It's compatible with both the 4mm ID Tubing here or 5mm ID here. Specifications:1. Suits pressures 0-15psi (but with different guages the unit can go above 100psi)2. Made from food grade acetal3. Stainless screws4. 8mm (5/16") push on both sides

Fully assembled kit with Ball lock coupling and overpressure valve with manometer. If you want to ferment under pressure on e.g. FermZilla, this is the solution for you! The adjustment screw on the valve makes it easy to increase or decrease the set pressure.The parts can be easily disassembled for cleaning. Including: 1x BlowTie 2 Spunding Valve with 0-15psi pressure gauge (can be replaced)1x Duotight 8mm (5/16") Ball Lock for CO21x Intermediate piece 8mm (5/16")

Trapets Adaptor. Tired of losing gas every time you connect or disconnect your sodastream cylinder to your normal sodastream cylinder adaptor. This new design is what you need. Unlike our cheaper sodastream cylinder adaptors, this adapter has the added advantage that you can use the side thumb screw to depress the pin in the middle of the adaptor.  This pin adjustment makes the sodastream cylinder adaptor significantly easier to use. Normal sodastream adaptors require an alan key to adjust the pin height and depending on how worn out your seal is you may need to adjust this pin periodically.  Also conventional cheaper sodastream adaptors also tend to leak gas every time you connect and disconnect them from your regulator or the adaptor itself.  This is also a pain.  This new sodastream adaptor design is significant better designed with the handy thumb screw on the side of the unit allowing you to eliminate cumbersome adjustment and it also gives you the ability to turn off and on the gas flow. This adaptor is used if you have a SodaStream Cylinder and wish to use a conventional Type 30 Regulator with it, perhaps for bbq or picnic and you don't want to carry your 6kg or 2.6kg Gas Cylinder this is the adaptor that will enable you to make a handy portable system. Ideal for the low volume user or someone who hasn't bit the bullet in a big cylinder. *does not include regulator or gas canister

Kegland has created the world's smallest digital manometer with a backlit screen. It is robust, very accurate and has a long battery life (the battery lasts for several years if it is only read once a day). The pressure gauge can display the pressure in units such as PSI, KPA and BAR. It can measure pressures up to 6.2 bar (90 psi). It is perfect for Inline Regulator, Blowtie2 and Mini 360 Core Actuator Regulator.To display the pressure value, press the red button. To turn on the backlight, hold down the yellow button. To select device, press the yellow button several times. The screen turns off automatically after 15 seconds to save battery. Please note that the pressure gauge is only intended for gas and must not be exposed to liquid. Always use a check valve if there is a risk of backflow to the regulator.Specifications:Accuracy: +/- 1% at 20°C< br />Battery: CR2032 (included)Battery time: Over 2 years when reading once per day.Size: 27 mm x 27 mmDimensions of coupling: Ø 7.8 mm with O-ring.

The Duotight Flow Stopper - Automatic Keg Filler (KL09393) is an fantastic device designed to streamline the keg filling process for homebrewers. This product,  offers a hassle-free method of filling kegs, or transferring between kegs during filtering or after fining. It is particularly useful because it attaches to the gas post of your keg and automatically cuts off the flow once the keg is full, thus preventing overfilling and spillage of beer. Some of its key features include compatibility with Duotight fittings, ensuring a secure and leak-free connection, and the ability to work with a BlowTie spunding valve. When used with the BlowTie, it allows you to apply head pressure to the keg, enabling control over the flow speed and reducing foam during the filling process.For this setup, a short length of 8 mm OD EVABarrier tubing is required to connect the BlowTie to the outlet of the Flow Stopper. This flow stopper includes:2 x duotight 5/8" thread x 8mm pushfit (for hose)1 x duotight Elbow pushfit 8mm1 x duotight straight 8mm pushfit x 7/16" thread for threaded ball lock1 x ball float1 x stainless spring1 x acrylic sight glass (with 5/8 male thread on either side)*Colours of the floating ball and joiners may vary. You need to buy a ball lock with a thred if you do not have one. 

Actuator Regulator in a robust and functional design for Sodastream cylinder and Co2 Cartridges w/thread. The Co2 flow is first activated when the piston at the top is screwed down into the pawl of the Co2 cylinder or penetrates the cartridge, ensuring that no Co2 is lost or escapes before the Co2 cylinder or cartridge is fully in place.Remove the bottom peace when mounting the regulator on a Sodastream cylinder. The design of the regulator allows for the cylinder to hang on the side of a Cornelius keg.- 2 outputs, one at a 45° angle, which fits a normal plastic ball lock and one at a 90° angle for stainless steel ball locks.- Coupling with thread that fits ball locks- 6.5mm (1/4") Duotight compatible hose barb- The manometer is well protected by a metal housing. The manometer can be interchangeable with other scales.- 65 psi/4.5 bar pressure relief valve which can be interchangeable with other pressure relief valves. Please note this is not compatible with 2 or 6 kg Co2 cylinders.WARNING:Do not overtighten the regulator onto your Co2 cylinder. It is recommended to use a spanner to hold the Sodastream cylinder while attaching and detaching the regulator.

The MK4 Dual Gauge gas regulator (Type 30 for CO2 / Post Mix Gas) is the only regulator you'll ever need to buy. With a large body and precision diaphragm, this regulator provides high flow rates and very accurate adjustments in both kPa, Bar and PSI.The outlet has 1/4" MFL threads, and it comes with a DuoTight (pushfit) converter to 8mm hose.NOTE: This regulator is sold with the Green 65PSI (4.5 BAR) pressure relief valve.

KegLand charger kits are made from machined anodised aluminium, no cheap plastic here!This Premium Regulated CO2 Charger is the compact solution for portable setups. Simply screw on the MFL threaded disconnect (Stainless Steel Gas MFL will require teflon tape) then using the needle valve adjust how much pressure you need.Our Premium Regulators do not come with CO2 bulbs/cartiges. You will need to purchase these 16g bulbs separately from our website. Alsd widely available at large supermarkets if you're in dire need.Please note* MFL Grey disconnect and gas cartridge are not included.

Kegland Oxygen Flow Meter with 8mm Duotight. Pure oxygen is the best way to get your yeast off to a cracking start. Simply use this high pressure and high capacity disposable tank to boost dissolved oxygen levels in your cooled wort.Oxygen is great for use with high gravity beers or pilsners where you are trying to build up a large population of yeast.We would recommend the use of a diffusion stone. These small diffusion stones create very fine bubbles of oxygen in your wort and help the oxygen to dissolve into solution faster. If you want a really nice optoin we would recommend the use of this oxygenation wand and this is a bit more erganomic as you have a rigid stainless tube to force the stone to the bottom of the fermenter rater than it floating to the surface.This flow control device is designed to be used with our oxygen cylinder and regulator that can be purchased separately.InstructionsAttach the regulator to to the top of your disposable cylinder. Turn pressure up to 1-10psi. Immerse diffusion stone in wort for 1-2 minutes. Then dial the flow meter up to 1.0L/min. The time it takes to saturate will depend on volume, temperature, depth of vessel, and type of stone (0.5mm recommended)NOTE: Wort must be cold. It is extremely difficult to get oxygen to dissolve into hot wort so it's essential to cool wort completely before starting this process.

This pressure kit is so you can convert the 29 and 58L Kegmenters into either pressure rated fermenters or use the Kegmenters as ball lock kegs. This lid comes with a red pressure relief valve (that opens at 2.5bar - compatible thread to cornelius type PRVs). The lid has accurately machined gas and liquid posts.This lid is ideally suited to also fermenting under pressure so you can use a spunding valve/adjustable pressure relief valve so you can naturally carbonate during primary fermentation.It should be noted that we now make this lid with a 60cm silicon dip tube with a stainless fload. This innovative design means when you draw liquid from this kegmenter the liquid will always be drawn from the top 2.5cm of liquid meaning only the clearest wort/beer will be drawn from the kegmenter. This is particulrly useful if you are dispending directly from the fermenter or simply want to separate clear liquid from sediment which has sunken to the bottom of the kegmenter.

Small keg with quick-connectors for gas and beer. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 10 liters Height: 49 cm (54,5 cm incl. quick connector valve) Diameter: 17.5 cm Weight: 1950 g Manufacturer: Mangrove Jack's

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 3 liters Height: 27.5 cm (33 cm incl. quick connector valve) Diameter: 13.5 cm Weight: 950 g Manufacturer: Mangrove Jack's

Small keg with quick-connectors for gas and beer. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. The lid with valves is provided with built-in safety valve that opens at about 2.5 bar. In this package, Keg, Lid, Lid with quick connectors and pipe in Silicone. Material: Stainless steel Volume: 5 liters Height: 28 cm (33,5 cm incl. quick connector valve) Diameter: 17,5 cm Weight: 1280 g Manufacturer: Mangrove Jack's

Small stainless mini keg with lid. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. See related products below to add ball lock lids of different types for your application.Material: 304 Stainless steel Volume: 10 liters Height: ca 47 cmDiameter: ca 17 cm Working pressure: 4 bar (60 psi)Maximum pressure: 8 bar (120 psi)

Small stainless mini keg with lid. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. See related products below to add ball lock lids of different types for your application.Material: Stainless steel Volume: 3,6 liters (1 Gallon)Height: ca 29.5 cmDiameter: ca 13.5 cmWorking pressure: 4 bar (60 psi)Max pressure: 8 bar (120 psi) 

Small stainless mini keg with lid. Easy to fit at home in the refrigerator and easy to carry bring on a picnic or party. See related products below to add ball lock lids of different types for your application.Material: 304 Stainless steel Volume: 5 liters Height: ca 29.2 cmDiameter: ca 17.4 cm Working pressure: 4 bar (60 psi)Maximum pressure: 8 bar (120 psi)

Lid for stainless steel Mini Kegs with two ball lock connectors (liquid+gas), a PRV Pressure release valve and 30cm silicone hose. Perfect for connecting beverage hose and carbonation hose via the ball-lock ball connectors. Contains:- Mini Keg Lid with Ball Lock and PRV- 30 cm (11.8'') silicone hose- Extra Replacement O-ring kit Material: Stainless steelSize: 78mm*55mmThread size lid: 33.5*1.5

Spear Lid for stainless steel Mini Kegs with a G5/8 tap connector, one ball lock connectors (gas), a PRV Pressure release valve and 30cm silicone hose. Perfect for connecting beverage tap and carbonation hose via the ball-lock ball connector. Contains:- Mini Keg Spear Lid with G5/8 tap connector, gas Ball Lock and PRV- 30 cm (11.8'') silicone hose Material: Stainless steelThread size lid: 33.5*1.5

O-ring for Cornelius Keg Lid

O-ring for Cornelius Keg Valves. 1pc.

OxyTurbo Double 3-clock Regulator

OxyTurbo Single Regulator (1 clock)

OxyTurbo Single Regulator 2-clocks

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. The keg is used with a separate tap with carbonation capsule. The beer shelf life is several weeks. Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.

A small 5-liter party keg that fits perfectly in your refrigerator and is easy to bring to a party. If you introduse air into the keg, the beer should be consumed within a few days from the keg is opened. The keg can also be used with a separate tap with carbonation capsule. If you serve the beer without introducing beer with the built-in tap, the beer may hold for several weeks. NOTE: Prime the beer with 2-3g/L sugar.Volume: 5 liters Height: 25 cm Diameter: 17 cm Can be reused.Add rubber plug, se below.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors.1/2" (12.7mm) outer diameter och 3/8" (9,5mm) inner diameter.Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C.Outer diameter: 1/2" (12.7mm)Inner diameter: 3/8" (9,5mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade restrictor tubing for both liquid and CO2. Provides additional pressure drop to prevent excess foaming.Inside diameter: 1/8" (3.2 mm)Outside diameter: 3/16" (4.8 mm)Price per meter. If more than one meter is ordered, its delivered in one piece.

Polyethylene (LDPE) food grade tubing for both liquid and CO2. Fits Pushfit, Fluidfit and John Guest (JG) connectors. Temperature range: -45 till +60 °C. Outer diameter: 5/16" (8 mm)Inner diameter: 5,4 mm Price per meter. If more than one meter is ordered, its delivered in one piece.

A complete PET 20L kit Oxebar with, regulator, restrictor tube tap kit and gas bottle included.

PET Keg 20L Oxebar Amber from Kegland with Ball Lock connectors, Dip Tube, Floater & Handle is a very easy and convenient way to store and transport beer compared to heavy and bulky steel kegs like Cornelius kegs. It's a very inexpensive way to serve draft beer and bring beer to all kinds of events. Because it can be washed and reused, it's also an inexpensive way to store your beer. Do not exceed 4 Bar / 65psi. With the special polymer mixture, the oxygen barrier is improved three times compared to regular PET. Beer can easily be stored up to 6 months in these kegs. Diameter 235mmHeight 640mm  Do not exceed 4 Bar / 65psi. Contains:- 20L PET Keg Oxebar Amber Mono Barrier- Lid with handle- Green relief valve (65 psi/4.5 bar)- 1 meter silicone hose (dip tube) with floater and filter- Red Ball Cap for FermZilla, Carbonation Cap- Yellow Ball Cap for FermZilla, Carbonation Cap

Mini Keg PET Oxebar 4L including cap and handle is a very light and convenient way of storing and transporting beer compared heavy and bulky steel kegs such as Cornelius kegs. It is a very inexpensive way of serving draft beer as well as bringing beer to any type of event. Since it can be washed and reused, it is also a cheap way to store your beer.With the special polymer blend the oxygen barrier is improved by 3 times compared to normal PET. Beer can easily be stored up to 6 months in these kegs.Do not exceed 4 Bar / 65psi Diameter:155mmHeight: 325mmFor dispensing we recommend the specially designed tapping head.

A complete minikeg kit Oxebar with gas bottle included.

Mini Keg PET Oxebar 8L including cap and handle is a very light and convenient way of storing and transporting beer compared heavy and bulky steel kegs such as Cornelius kegs. It is a very inexpensive way of serving draft beer as well as bringing beer to any type of event. Since it can be washed and reused, it is also a cheap way to store your beer.With the special polymer blend the oxygen barrier is improved by 3 times compared to normal PET. Beer can easily be stored up to 6 months in these kegs.Do not exceed 4 Bar / 65psi Diameter: 155mm Height: 520mm For dispensing we recommend the specially designed tapping head.

A complete minikeg kit Oxebar with gas bottle included.

This tapping head (Hydra) with dip tube filter (pressure kit) fits the 4 and 8 L PET Oxebar mini kegs.  The tapping head is designed to fit standard ball lock disconnects making it an inexpensive solution for draft beer and bringing beer anywhere. The tapping head kit includes beer and gas posts, 2,5 bar pressure relief valve and a dip tube including filter. Ideal for any type of drink you want to serve directly from the keg.NOTE: PET Mini Keg sold seperately - Not Included.

For Kegland PET Mini kegs. Cap where a Pressure Relief Valve can be mounted. The cap has a standard PET bottle thread. Please Note: Never exceed the pressure capabilities of your container. Pressure Relief Valves are not spunding valves!

A simple plastic tap with 1/4'' (6,5mm) stem that fits directly to 1/4'' DuoTight/Pushfit/John Guest fittings.

A simple plastic tap faucet that attaches directly to the beer line. 7 mm (1/4") barb.

Adjustable pressure valve with manometer. Can handle pressures up to 2 bar / 30 psi. 1/4" MFL.

Regulator for CO2 cylinder with dual outputs and one manometer. Perfect if you want to divide the CO2 between two kegs for example.IN: W21.8*1/14 RH (CO2 coupling) OUT: Quick couplings

Tap Faucet with handle and adjustable flow, that fits i.e. Mini Keg Spear Lid withn the G5/8" connector. 304 stainless steel, Chrome plated body. This ultra-durable material won’t pit or tarnish, and you’ll never have to worry about your beer being tainted by a gross metallic taste. You can use this lever to adjust the flow rate of beer to avoid excess foam. This is especially useful for hard-to-pour beers, if you’re serving a wide variety of styles, using frosty mugs, or serving sampler glasses. Connect it directly to a beer or soda keg .Use this keg faucet adapter assembly to make your keg more portable (or just to get away from that picnic tap). You can use the barb to connect 5/16’’ beer line or directly use the liquid ball lock post on the corny keg.

Tap Faucet with handle, adjustable flow, and Ball lock connector (included), and the G5/8" connector. 304 stainless steel, Chrome plated body. This ultra-durable material won’t pit or tarnish, and you’ll never have to worry about your beer being tainted by a gross metallic taste. You can use this lever to adjust the flow rate of beer to avoid excess foam. This is especially useful for hard-to-pour beers, if you’re serving a wide variety of styles, using frosty mugs, or serving sampler glasses. Connect it directly to a beer or soda keg .Use this keg faucet adapter assembly to make your keg more portable (or just to get away from that picnic tap). Directly use the liquid ball lock post on the corny keg.

The pluto beer guns have become an iconic beer dispensing tool used throughout the industry. Whether it be in your garage drinks fridge or on the go with picnic set ups.Now with a new and improved design!Fits 1/4" pushfit/duotight/JG (not included) or 4-6,5mm inner diameter hose.This model is the Black Nylon / Stainless version, it comes with a barb that can suit 4mm to 6mm beer line. Extremely tough nylon coating, we've done a lot of testing with this model. Running it over in the ute did not stop the from pouring an icy cold one!Key Features:- Reinforced Black Nylon Coated- Adjustable tension spring- 100% detachable for thorough cleaning of potential blockages.Note: Only Pluto Gun is included.

Tap Faucet with handle and ball lock connector (included). 304 stainless steel, Chrome plated body. This ultra-durable material won’t pit or tarnish, and you’ll never have to worry about your beer being tainted by a gross metallic taste. Connect it directly to a beer or soda keg. Use this keg faucet adapter assembly to make your keg more portable (or just to get away from that picnic tap).

304 Stainless Steel Tap. 200 PSI rated. 3/8" BSP thread This extremely durable material won't tarnish easily, and you never have to worry about your beer tasting bad with an unpleasant metallic taste.