Accessories

Rubber valve plug Red-Black for 5L Party kegs (mini kegs) with an integrated faucet. Made for single use. May be opened to allow air into the keg, so the beer will pour when the faucet is opened.

Spring for relief valve for Cornelius keg

Stainless Float With Silicone Dip Tube 80cm. Ensure that only the top layer of beer is poured from the fermenter, also fits Fermzilla perfectly. Silikcone tube measurements (dip tube):Inner diameter: 6mm (ID 0.23”)Outer diameter: 8mm (OD 0,35”) Floater diameter: 43mm

This Hose Kit that makes it very easy to rinse kegs with water. Its also perfect if you want to fill a keg with water for making sparkling water. Fits ball lock cornelius kegs, and other kegs with ball lock disconnects. The threaded ball lock disconnects fits both gas and liquid (beer) ball lock posts. Here's how you can clean Cornelius kegs:1. Release the excess pressure in the keg and open the lid. Empty if there is any left.2. Connect the gardena coupling to a water tap and the ball-lock disconnect to the keg.3. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.4. Set the barrel up and fill up with hot water and add e.g. PBW.5. Replace the lid and flush some detergent through both gas and liquid posts and the safety valve. Leave for about 15 minutes.6. Release the excess pressure and open the lid. Empty the cleaning agent (or transfer to the next keg if you are cleaning several at the same time).7. Connect the gardena coupling to a water tap and the disconnect to the keg.8. Place the keg upside down in the sink and start the hot water. Leave to rinse for a few minutes.9. Sanitize the keg with e.g. Star San just before filling the next batch. Tip: Buy a threaded PET adapter and you can also easily rinse your beer lines too.

This trapets adapter in nickel plated brass allows you to attach 425 g aluminum CO2 cylinders to a CO2 regulator with standard W21.8x1/14" threads.Version 2.3 features a spring pressure screw, that makes it no longer necessary to make adjustments for different brands of CO2 cylinders in most cases.Comes equipped with a safety vent hole to minimize the risk of damaging the gasket when unscrewing it from the CO2 cylinder with remaining pressure.Made in Sweden.

Brew Grease is a food‑grade lubricant used to coat O-rings and gaskets in your brewing setup. It is NSF‑H1 certified for incidental contact with food and drink. It ensures that connections remain tight and leak-free — crucial for a successful brewing process. You’re at your brew stand, tools laid out, yeast bubbling away in your fermenter and you know how every snug connection matters. Even the smallest O‑ring or seal, if dried, cracked or unlubricated, can create a leak that wastes wort or sends pressure escaping. That’s why Brew Grease becomes part of your ritual, an unsung hero that quietly makes sure your fittings stay tight, seals stay soft, and your brew day stays on track. Benefits of Beer GreaseHigh Quality: Food-safe and approved for use in brewing systems.Extends Lifespan: Helps reduce friction and wear, prolonging the life of O-rings and seals.Tight Sealing: Keeps your connections leak-free and secure.Easy to Apply: Smooth and easy to use on seals and O-rings for optimal performance.Versatile Use: Suitable for various types of seals and fittings in your brewing system. A Unsung Brew Hero You’re at your brew stand, tools laid out, yeast bubbling away in your fermenter and you know how every snug connection matters. Even the smallest O‑ring or seal, if dried, cracked or unlubricated, can create a leak that wastes wort or sends pressure escaping. That’s why Brew Grease becomes part of your ritual - an unsung hero that quietly makes sure your fittings stay tight, seals stay soft, and your brew day stays on track. How to ApplyClean all connections and dry thoroughly.Gently rub a small amount of Brew Grease around each O‑ring, gasket or fitting. Think of it as seasoning your rubber parts, not flooding them.Assemble your system carefully; seals should seat easily - not stretch or slip.Reapply before extended brew sessions, or when disassembling for cleaning or storage.

Valve Beer/Liquid Ball-lock for Cornelius keg.

Valve CO2 Ball-lock for Cornelius keg

This is a EPDM 5/8 Washer which is suitable for Keg Couplers and Tap Shanks. (10 Pack) - 15mm ID x 21.5mm OD x 3mm. EPDM = Ethylene Propylene Rubber which has excellent chemical resistance including being compatible with ozone, oils, wide variety of alkaline and acid compounds, water, alcohol, ketone and beverages. EPDM is also resistant to aging, weather and will not perish easily like other rubber compounds.   When compared with silicon and vinyl EPDM has better gas transmission rates, better wear resistance, is BPA free and is the number one choice for many long lasting food grade applications. Specifications:15mm ID x 21.5mm OD x 3mm