Brewtools

Flexible insulation jacket for your Brewtools B150pro. Zippers make it easy to take on and off the brewer. It insulates and retains heat better so you use less energy to heat the vessel.· Black· 5 mm thick neoprene· White logo

Sparge manifold for simple spreading of sparge water over the grains. It can also be used as a mash manifold during mashing for a more efficient distribution of wort over the grainbed. Made for Brewtools B40Pro and is attached to the center pipe and follows when the malt pipe is liftet up for sparging. Top and end-plugs made in the Brewtools characteristic blue silicone for easy access for cleaning after use. Diameter: 260mmIncludes:- Manifold- Top plug in silicone- End plugs in silicone

Sparge manifold for simple spreading of sparge water over the grains. It can also be used as a mash manifold during mashing for a more efficient distribution of wort over the grainbed. Made for Brewtools B150Pro and is attached to the center pipe and follows when the malt pipe is liftet up for sparging. Top and end-plugs made in the Brewtools characteristic blue silicone for easy access for cleaning after use. Diameter: 420mmIncludes:- Manifold- Top plug in silicone- End plugs in silicone

Bracket for mounting the control box for your brewing system on the wall/table or on a VESA-mount arm. Used in combination with the cable extension kit. Features VESA75 and VESA100 with M4 threads. Made in powder coated stainless steel. Fits Brewtools B40/B80/B150.

5-pack gaskets for 34mm Tri-clamps.

Tri Clamp for connecting two TC 4" fittings. Used to connect accessories to our steam hats.Gasket is sold separately.

Thermowell for sensors. Triclamp coupling 1.5 ". Inside diameter: 7mm Length: 160mm.

Sampling crane to take samples from the tank during the fermentation process. Can also be used at start-up together with B40 / 80/150 Pro to take samples of the wort during the brewing day. Triclamp 34mm.

Brewtools HopDrop Kit 4" for dryhopping and adding other ingredients to a pressurized fermenter without oxygen. Fits F100/F150/F200/F300 and other 4".Included in the box:- Butterfly-valve, TC 4"- TC Adapter, 4" til 34mm- TC Pipe, 4", L=200mm - Tri Clamp, 4" (2 pcs)- Tri Clamp, 34mm (3 pcs)- TC34mm Manual PRV- TC34mm Ball Lock connector, Gas- TC Tee, 34mm, L=60mm- TC Gasket, 4", (3 pcs)- TC Gasket, 34mm DN20, 5-pack

Brewtools MiniUni 40L The MiniUni™ tanks are a range of high quality, flexible yeast tanks at a very reasonable price. They can be used for fermentation, storage and serving of beer but also other uses such as water heating, storage of cleaning agents, HERMS installation, etc. MiniUni™ can be placed in the included base but also hung on the wall with the included wall bracket. By using a pressure fermentation kit (optional equipment) you can ferment under pressure and carbonation in the tank.All MiniUni™ are approved for 2 bar (30 psi) and will last a lifetime!! Key Features:PureBlast™ surface inside and out which eliminates the use of wax and polishing agents in manufacturing. The tank also does not need to be passivated.Easy cleaning with 4" Tri-Clamp opening in the top and a 2" Tri-Clamp in the bottomPressure approved up to 2 bar (30 psi)Wall bracket is included Designed and produced with quality in focus. Tested by independent party to meet PED 2014/68/EUSpecification:Pack size: 34 (w) x 34(d) x 92 (h) cmWeight without packaging: 11.2 kgWeight with packaging: 12 kgTank diameter (inside): Ø28 cmMax. recommended volume: 40 litersVolume, cone: 1.7 litersMaterial: 1.5mm stainless steel (SS304)Maximum pressure: 2.0 bar / 30 PSI< strong>This comes with:MiniUni™ TankBase with silicone gasketWall mount and baseSafety lock for wall mountComposite TC adapter 4" to 34mmIce lock, 3-piece with holderTri-Clamp 4"Tri-Clamp 2"Tri-Clamp gaskets

Brewtools MiniUni 50L The MiniUni™ tanks are a range of high quality, flexible yeast tanks at a very reasonable price. They can be used for fermentation, storage and serving of beer but also other uses such as water heating, storage of cleaning agents, HERMS installation, etc. MiniUni™ can be placed in the included base but also hung on the wall with the included wall bracket. By using a pressure fermentation kit (optional equipment) you can ferment under pressure and carbonation in the tank.All MiniUni™ are approved for 2 bar (30 psi) and will last a lifetime!! Key Features:PureBlast™ surface inside and out which eliminates the use of wax and polishing agents in manufacturing. The tank also does not need to be passivated.Easy cleaning with 4" Tri-Clamp opening in the top and a 2" Tri-Clamp in the bottomPressure approved up to 2 bar (30 psi)Wall bracket is included Designed and produced with quality in focus. Tested by independent party to meet PED 2014/68/EU Specification:Pack size: 34 (w) x 34(d) x 108.5 ( h) cmWeight without packaging: 12.85 KgWeight with packaging: 14.8 KgTank diameter (inside): Ø28 cmMax. recommended volume: 10 litersVolume, cone: 1.7 litersMaterial: 1.5mm stainless steel (SS304)Maximum pressure: 2.0 bar / 30 PSIThis comes with: MiniUni™ TankBase with silicone gasketWall mount and baseSafety lock for wall mountComposite TC adapter 4" to 34mmIce lock, 3-piece with holderTri-Clamp 4"Tri-Clamp 2"Tri-Clamp gaskets

Stainless steel wall bracket for 3x MiniUni in all sizes. 5 double holes with 150mm spacing makes it easy to install in wall beams.

TC34mm elbow 45 degrees.

Sight glass with 34 mm TC connection. The sight glass allows you to see the color of the wort during circulation. Also suitable for oxygenation to see the flow of oxygen. Usually mounted between a 3-way valve and the countercurrent cooler.

Brewtools power cable 10m. The power cable fits B40pro, B80pro and B150pro. Cable: Rubber, H07RN standard (3x2.5mm2). Contact: CEE 7/7 (16A).

Brewtools butterfly valves are developed for use with Brewtools Unitanks for the best possible sanitary properties and ease of cleaning. Made with the highest possible quality of steel and EPDM.

Brewtools butterfly valves are developed for use with Brewtools Unitanks for the best possible sanitary properties and ease of cleaning. Made with the highest possible quality of steel and EPDM.