Brewolution
Brewolution Brewster Brewery 40L
Brewster is a 40 liter All-in-one microbrewery for home brewed Craft Beer. Whether you fancy ales, lagers, IPA’s, porters, stouts, saisons or any other style of brew. Let the new Brewster Beacon lead the way to even better brewing- experiences and results. Brewster Beacon will brighten up your life and give thousands of good moments, as well as thousands of liters of homemade craft beer. Brewster Beacon differentiates itself from competitors and the former Brewster NG, we have taken all our experience and knowledge in construction of the brewing system. This has contributed to the development of the best Brewster so far. In the new Brewster we have taken all the best from Brewster NG and loaded the new version with brilliant details and improvements.Brewolution Brewster Brewery 40L- Polished stainless steel AISI 304- Brew capacity 30 liters, total capacity 40 liters- Weight: 10 kg- Dimensions: Height and diameter: 57.5 x 36.0 cm- Heating element with a capacity of 2500 W, located at the bottom of the kettle, therefore avoiding caramelization.- The heating element is adjustable from 100 W to 2500 W, in 100 W increments.- Temperature range from 25°C to 100°C, adjustable to 0,1°C.- Temperature control up to 100°C, with +-1°C deviation.- Integrated circulation with adjustable flow rate made from stainless steel AISI 304- Stainless steel AISI 304 grain basket with built-in overflow pipe for boil dry protection. The basket can be adjusted in relation to the amount of malt. The basket holds up to 9 kg.- Clear and easy to read LCD monitor- Manual or automatic program control with alarms/reminders.- Programmable of up to 9 mashing steps and up to 9 hop/spice additions- Built-in memory with capacity for saving up to 10 recipes- Powerful 230 V magnetic pump with separate on/off button. Capacity 8 L./min.- Glass lid ensuring easy visual monitoring of the mashing process.- All Brewster Beacons are tested before shipping- Danish and English instruction manual- 220V-240V, 50Hz/60Hz EU-version power cord (UK power cord NOT included)Please note: No cooling spiral is included, we recommend at least a 7,5m cooling spiral. Instructional videos
Brewolution Brewster Brewery 40L with Chiller Set
Brewster is a 40 liter All-in-one microbrewery with Chiller-Set for home brewed Craft Beer. Whether you fancy ales, lagers, IPA’s, porters, stouts, saisons or any other style of brew. Let the new Brewster Beacon lead the way to even better brewing- experiences and results. Brewster Beacon will brighten up your life and give thousands of good moments, as well as thousands of liters of homemade craft beer. Brewster Beacon differentiates itself from competitors and the former Brewster NG, we have taken all our experience and knowledge in construction of the brewing system. This has contributed to the development of the best Brewster so far. In the new Brewster we have taken all the best from Brewster NG and loaded the new version with brilliant details and improvements.Brewolution Brewster Brewery 30L with Chiller-Set- Chiller-Set: Cooling Spiral 8,8m with tubes and tap connectors- Polished stainless steel AISI 304- Brew capacity 30 liters, total capacity 40 liters- Weight: 10 kg- Dimensions: Height and diameter: 57.5 x 36.0 cm- Heating element with a capacity of 2500 W, located at the bottom of the kettle, therefore avoiding caramelization.- The heating element is adjustable from 100 W to 2500 W, in 100 W increments.- Temperature range from 25°C to 100°C, adjustable to 0,1°C.- Temperature control up to 100°C, with +-1°C deviation.- Integrated circulation with adjustable flow rate made from stainless steel AISI 304- Stainless steel AISI 304 grain basket with built-in overflow pipe for boil dry protection. The basket can be adjusted in relation to the amount of malt. The basket holds up to 9 kg.- Clear and easy to read LCD monitor- Manual or automatic program control with alarms/reminders.- Programmable of up to 9 mashing steps and up to 9 hop/spice additions- Built-in memory with capacity for saving up to 10 recipes- Powerful 230 V magnetic pump with separate on/off button. Capacity 8 L./min.- Glass lid ensuring easy visual monitoring of the mashing process.- All Brewster Beacons are tested before shipping- Danish and English instruction manual- 220V-240V, 50Hz/60Hz EU-version power cord (UK power cord NOT included) Instructional videos
Brewolution Brewster 40L Heat Insulating Jacket
Heat insulating jacket for the Brewolution Brewster 40L brewing system. Provides faster heating and reduces energy consumption. Material: 5 mm neoprene foam.
Brewolution Brewster 40L Heat Insulating Jacket
Brewster Beacon 70 Kettle Wrap. Heat insulating jacket for the Brewolution Brewster 70L brewing system. Provides faster heating and reduces energy consumption. Material: 5 mm neoprene foam.
Brewster Hop Spider
Brewster Hop Spider with fine stainless steel mesh to keep hops separated from the wort during the boil.InfoMaterial: 304 stainless steelMesh size: 310 micronsTotal height: 38 cmCylinder height: 36 cmDiameter opening: 15 cmDiameter bottom: 10 cm
DigiBoil 35L Mash Upgrade Kit
Now you can upgrade your DigiBoil 35L with this stainless malt basket and false bottom. This complete kit makes it easy to mash, sparge and filter out hops in your DigiBoil.The malt basket is placed on top of the included false bottom with feet to avoid the malt closest to the heating element in the bottom gets burnt. To get the best results and an even temperature, it is recommended that you only use the weaker heating element of the Digiboil during mashing.After the mashing is complete, you sparge by lifting, rotating and placing the malt basket on the stand mounted on the inside of the top of the pot.The false bottom with feet can also continue to be needed during cooking to prevent particles from burning into the bottom. It also works as a hop and debree filter after the wort cooling when transferring the wort to the fermenter.This is included in the DigiBoil Mash Upgrade Kit:- Malt basket (Malt pipe)- False bottom for the malt pipe- False bottom with feet- Lifting handle- Stand for the malt basketDimensions:Height: 38.5 cmDiameter at the top: 29.5 cmMaterial: Stainless steel
DigiBoil 65L Mash Upgrade Kit
Now you can upgrade your DigiBoil 65L with this stainless malt basket and false bottom. This complete kit makes it easy to mash, sparge and filter out hops in your DigiBoil.The malt basket is placed on top of the included false bottom with feet to avoid the malt closest to the heating element in the bottom gets burnt. To get the best results and an even temperature, it is recommended that you only use the weaker heating element of the Digiboil during mashing.After the mashing is complete, you sparge by lifting, rotating and placing the malt basket on the stand mounted on the inside of the top of the pot.The false bottom with feet can also continue to be needed during cooking to prevent particles from burning into the bottom. It also works as a hop and debree filter after the wort cooling when transferring the wort to the fermenter.This is included in the DigiBoil Mash Upgrade Kit:- Malt basket (Malt pipe)- False bottom for the malt pipe- False bottom with feet- Lifting handle- Stand for the malt basketDimensions:Height: 40cmDiameter at the top: 38,5cmMaterial: Stainless steel
Brewolution Brewster Beacon 40L Whirlpool arm
Whirlpool arm for Brewster 40L that fits onto the existing recirculation pipe. It recirculates the wort and thereby making a whirlpool at the bottom of the kettle.Length 35,5 cm.
Brewolution Brewster Beacon 70L Whirlpool arm
Whirlpool arm for Brewster 70L that fits onto the existing recirculation pipe. It recirculates the wort and thereby making a whirlpool at the bottom of the kettle.Length 39,5 cm.
Brewolution Brewster Telescopic Overflow Pipe 40L/70L
Brewolution Brewster Telescopic Overflow Pipe 40L/70L. Spare part.
Brewolution Brewster Beacon 40/70 Bottom Filter
Stainless steel bottom filter for Brewster Beacon 40 and 70-liter. Brewolution has developed a completely new "false bottom" that connects directly to the inlet to the pump instead of lying loose over the entire bottom. Instructions can be found here!
Graviator - Wireless Wifi & Bluetooth Hydrometer
A wireless hydrometer and thermometer that measures directly in the fermenter, and comminicates to the app BrewConnect via WiFi. It can be used independently in a brewing via WiFi, but the extra smart thing is that it can communicate directly with Ferminator Connect via Bluetooth. This allows a Ferminator Connect to know the exact temperature inside the beer and adjust the temperature even more precisely. The Gravity charger is charged wirelessly via the included wireless charger. It should therefore never be opened, and you avoid the risk of it leaking and destroying a brew. If the Graviator is not charged before brewing, this is not a problem. It can be charged in approx. 5 hours. The improved algorithm in Graviator, the unique design and build quality provide a high accuracy of ± 0.002 SG. The size and weight of the engraver also make it more stable under the crotch.Please observe! The Graviator does not work with steel fermenters.
Ferminator Connect - Wifi & Bluetooth Thermostat Controlled Cooler
We have taken all the best from Ferminator Basic and made a new version with WiFi and Bluetooth. It is now possible to control your Ferminator online and see current temperatures and settings. In BrewCreator you can enter data about your brew and see all information about your Ferminator Connect. The whole thing is gathered in a nice detailed graph, where you can follow the course of the temperature and see the changes that have been made. Ferminator Connect can also communicate directly with Graviator - a wireless hydrometer measuring directly inside your fermenter (bought seperately). At room temperature (20 °) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process. The height of the Ferminator can be easily expanded with 22cm high expansion modules that are purchased separately. In the Basic version, there is room for, for example, a 30L plastic fermenter or a 30L Fermzilla Flat Bottom. Ferminator Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20 °) the Ferminator can lower the temp. to 0 ° and raise it to 50 ° *. The height can easily be extended with optional 22cm high expansion modules (buy seperately). - The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters. - The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavor notes can be avoided and that the yeast will go into a hibernation state. - The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavor notes and profiles. Cooling / Heating Unit - At room temperature (20 ° C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Ferminator Connect - Dimensions outside: 560 L x 560 B x 651 H - Dimensions inside: 436 L x 436 W x 531 H Size fits: 32 L. Fermenter 30 L. FermZilla Flat Bottom Material Ferminator is made in EPS. Optional Expansion (Not Included, buy it seperately below) Expansion Module The expansion module has a height of 22 cm. The Ferminator can be expanded with several expansion modules an additional cooling / heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space. Note that some product images contain extra equipment not included.
Ferminator Basic Thermostat Controlled Cooler
Ferminator is a revolution in temperature-controlled fermentation. With a Ferminator it is now possible to ferment at a precise and stable temperature. At room temp. (20°) the Ferminator can lower the temp. to 0° and raise it to 50°*. The height can easily be extended with optional 22cm high expansion modules (buy seperately).The Ferminator makes is possible to ferment at the precise desired temperature. For example, it is possible to ferment a pilsner or lager at the proper low temperature or an ale at high temperature to achieve lots of desired esters.The Ferminator keeps the temperature constant during the fermentation process and can of course be adjusted at any time. A constant fermentation temperature ensures unwanted flavour notes can be avoided and that the yeast will go into a hibernation state.The Ferminator gives you full control over the fermentation and lets you experiment with completely new flavour notes and profiles.Cooling/Heating Unit- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50°C*.- Lowers temperature down to 20°C relative to ambient temp*.- Raises the temperature up to 30°C relative to ambient temp*.- The built-in fan ensures evenly temperature throughout the Ferminator.- The control unit is easily programmed and displays the actual temperature and set temperature.- The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid.- Maximum power consumption: 75 Watts, standby: 1 Watt. *Tested with Ferminator Basic, when using expansion modules, an additional Cooling/Heating Unit may be required.Ferminator Basic- Dimensions outside: 560 L x 560 B x 651 H- Dimensions inside: 436 L x 436 B x 531 HSize fits:32 L. Fermenter30 L. FermZilla Flat Bottom MaterialFerminator is made in EPS.Optional Expansion (Not Included, buy it seperately below)Expansion ModuleThe expansion module has a height of 22 cm.The Ferminator can be expanded with several expansion modules an additional cooling/ heating unit on the back. The expansion module and Ferminator can be disassembled taking up minimal storage space.Note that some product images contain extra equipment not included.
Ferminator Bottom Stainless Steel Plate
Protects the bottom of the Ferminator. The bottom plate has rounded corners and is made of stainless steel.
Graviator - Wireless Charger
Graviator Wireless Charger can charge a Graviator of approx. 5 hours. The charger follows the Qi standard and can charge with 5W / 7.5W / 10W. This charger will also work with your phone if it's Qi-enabled.
Ferminator Basic Cooling & Heating Unit
The Ferminator can be expanded with an additional cooling/ heating unit on the back, so you have two units that can regulate the temperature. This is a Ferminator Basic unit. At room temperature (20°) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process. Ferminator Basic Cooling & Heating Unit - At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Note that some product images contain extra equipment not included.
Ferminator Connect Cooling & Heating Unit
The Ferminator can be expanded with an additional cooling/ heating unit on the back, so you have two units that can regulate the temperature. This is a Ferminator Connect unit which can be connected to WiFi and be controlled online by BrewCreator.We have taken all the best from Ferminator Basic and made a new version with WiFi and Bluetooth. It is now possible to control your Ferminator online and see current temperatures and settings. In BrewCreator you can enter data about your brew and see all information about your Ferminator Connect. The whole thing is gathered in a nice detailed graph, where you can follow the course of the temperature and see the changes that have been made. Ferminator Connect can also communicate directly with Graviator - a wireless hydrometer measuring directly inside your fermenter (bought seperately). At room temperature (20°) the temperature can be lowered to 0 ° or increased to 50 ° *. A powerful thermoelectric Peltier element that stands for the cold, the fan dissipates the heat generated in the process. Ferminator Connect Cooling & Heating Unit - Wifi & Bluetooth- At room temperature (20°C) the Ferminator can lower the temperature to 0C and raise the temperature to 50 ° C *. - Lowers temperature down to 20 ° C relative to ambient temp *. - Raises the temperature up to 30 ° C relative to ambient temp *. - The built-in fan ensures evenly temperature throughout the Ferminator. - The control unit is easily programmed and displays the actual temperature and set temperature. - The temperature sensor can be mounted either on or inside the fermentation unit with a thermowell thereby measuring the precise temperature of the liquid. - Maximum power consumption: 75 Watts, standby: 1 Watt. * Tested with Ferm inator Basic, when using expansion modules, an additional Cooling / Heating Unit may be required. Note that some product images contain extra equipment not included.
Ferminator Plug & Pour Drip Tray - 2 Taps
Upgrade the Ferminator to a fullblood draft beer system with a simple plug and then pour craft beer straight away. Plug & Pour is an easy solution for transforming the Ferminator to a draft beer system with 2 taps.The following is included in Ferminator Plug & Pour Drip Tray - 2 Taps:• Plug & Pour mounting plate• Ferminator Drip Tray• Ferminator Strap• Ferminator Insert• 2 xTaps with flow control• 2 x Shanks• 2 x Ball Locks fluid• 2 x Ball Locks Co2 • Tube for liquid• Tube for Co2• Doutight fittings• T-Piece for Co2
Brewolution 40L Bottom/Lower Mesh Plate
Brewolution 40L Bottom Mesh Plate for malt basket. Lower mesh disc for Brewster Beacon. For use in the Grain basket.
Brew Trolley 57x57cm 200kg
Make your brew system, fermentor or other equipment mobile. Useful on the brew day. 4 robust rubber wheels, 2 of them can be locked.Maximum load: 200 kg.Measurement: 57 x 57cm
Brewolution Ratchet Pulley 113kg
Ratchet Pulley made of strong polypropylene rope and heavy-duty carabiner clips for a secure hold. Specified to 113kg.
Ferminator Insert for hole
Ferminator Insert for hole Spare part. Fits in the hole where the cooling units normally is in Ferminator Top.
Ferminator Strap
The strap holds the top together, ideal if the Ferminator needs to be moved. Can also be ideal when using an extra cooling/heating unit or Plug & Pour.
Conicus Pro 30L - Stainless Steel Pressure Fermenter
Conicus Pro 30L is a stainless steel conical fermenter that can handle max pressures up to 2 bars (1 bar working pressure). Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. With a unique 3” sight glass, allowing brewers to observe the beer, level, and fermentation process like never before.Conicus Pro by BrewolutionHomebrewing enthusiasts, meet the Conicus Pro! The essence of innovation and functionality in the world of homebrewing and stainless-steel conical fermenters or Unitanks for short. This is not just another pressurised conical fermenter; it is the realisation of every homebrewer's ultimate dream, offered at a price range accessible to all. Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. Conicus Pro by Brewolution.All the ports you needConicus Pro comes with all the features and ports you need. Including a 1.5” tri-clamp stainless-steel butterfly sample valve and a 2” tri-clamp stainless-steel butterfly dump valve. It has an operating pressure of 1 bar. The Conicus Pro stands as a testament to advanced fermenting technology.3-inch Sight GlassThe unique 3” sight glass is a game-changer, allowing brewers to observe the beer, level, and fermentation process like never before. Additionally, the sight glass is designed for the future with focus and features for digital hydrometers. The sight glass lets transmission from devices like the Graviator or other digital hydrometers escape, ensuring data flow and precise monitoring of your brew.CIP CleaningThe fantastic feature of the Conicus Pro is its capability for CIP (Clean-In-Place) cleaning. This method is not only easy and quick but also incredibly effective, guaranteeing comprehensive cleaning and sanitation.Temperature ControlStainless steel allows for effective temperature control. The Conicus Pro fits inside the Ferminator. With the Ferminator you can set the desired temperature and maintain this accurate temperature stable during the fermentation. It can also be easily integrated with an insulated jackets and coil chiller or other temperature control systems, providing stability during fermentation.In the box1x Conicus Pro Stainless-steel Fermenter1x 1,5” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp elbow 90°1x 3” Sight glass incl. 2 x gasket5x 1,5” tri-clamp blind cap1x 2” tri-clamp blind cap1x 4” tri-clamp blind cap5x 1,5” tri-clamp gasket4x 2” tri-clamp gasket1x 4” tri-clamp gasket5x 1,5” tri-clamp3x 2” tri-clamp1x 4” tri-clamp1x Airlock, 3-Piece1x Silicone Bung1x ManualSpecifications- Max volume 32 L. (Minimum Brew Size is 12-15L)- Max brew volume: 28-30* L. Read more in FAQs - Min brew volume: 12-15* L. Read more in FAQs - Working pressure 1 bar, max pressure 2 bar - Matt stainless-steel finish on the outside.- Super smooth stainless-steel finish on the inside.- Liter and US gallon scale on the inside.- 3” Sight glass with liter and US gallon scale- Stainless steel AISI 304- Lid: 1 x 4” port, 2 x 1,5” ports, 1 x 2” port- Body: 4 x 1,5” ports- 1,5” tri-clamp stainless-steel butterfly sample valve- 2” tri-clamp stainless-steel butterfly dump valve- 2 stainless steel handles- Airlock, 3-piece, and silicone bung incl.- Tree fixed legsSize & WeightHeight: 79,5 cm (87 cm with airlock)Diameter at the top: 42 cmWeight Gross: 18 kgWeight Net: 13.5 kg- See product image gallery for dimensions
Conicus Pro 55L Stainless Steel Pressure Fermenter
Conicus Pro 55L is a stainless steel conical fermenter that can handle max pressures up to 2 bars (1 bar working pressure). Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. With a unique 3” sight glass, allowing brewers to observe the beer, level, and fermentation process like never before.Conicus Pro by BrewolutionHomebrewing enthusiasts, meet the Conicus Pro! The essence of innovation and functionality in the world of homebrewing and stainless-steel conical fermenters or Unitanks for short. This is not just another pressurised conical fermenter; it is the realisation of every homebrewer's ultimate dream, offered at a price range accessible to all. Made from quality stainless steel, the Conicus Pro is robust, durable, and designed to elevate your home brewing experience. Conicus Pro by Brewolution.All the ports you needConicus Pro comes with all the features and ports you need. Including a 1.5” tri-clamp stainless-steel butterfly sample valve and a 2” tri-clamp stainless-steel butterfly dump valve. It has an operating pressure of 1 bar. The Conicus Pro stands as a testament to advanced fermenting technology.3-inch Sight GlassThe unique 3” sight glass is a game-changer, allowing brewers to observe the beer, level, and fermentation process like never before. Additionally, the sight glass is designed for the future with focus and features for digital hydrometers. The sight glass lets transmission from devices like the Graviator or other digital hydrometers escape, ensuring data flow and precise monitoring of your brew.CIP CleaningThe fantastic feature of the Conicus Pro is its capability for CIP (Clean-In-Place) cleaning. This method is not only easy and quick but also incredibly effective, guaranteeing comprehensive cleaning and sanitation.Temperature ControlStainless steel allows for effective temperature control. The Conicus Pro fits inside the Ferminator. With the Ferminator you can set the desired temperature and maintain this accurate temperature stable during the fermentation. It can also be easily integrated with an insulated jackets and coil chiller or other temperature control systems, providing stability during fermentation.In the box1x Conicus Pro Stainless-steel Fermenter1x 1,5” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp stainless-steel butterfly valve1x 2” tri-clamp elbow 90°1x 3” Sight glass incl. 2 x gasket5x 1,5” tri-clamp blind cap1x 2” tri-clamp blind cap1x 4” tri-clamp blind cap5x 1,5” tri-clamp gasket4x 2” tri-clamp gasket1x 4” tri-clamp gasket5x 1,5” tri-clamp3x 2” tri-clamp1x 4” tri-clamp1x Airlock, 3-Piece1x Silicone Bung1x ManualSpecifications- Max volume: 57 L.- Max brew volume: 50-55* L. - Min brew volume: 20-25* L.- Working pressure 1 bar, max pressure 2 bar - Matt stainless-steel finish on the outside.- Super smooth stainless-steel finish on the inside.- Liter and US gallon scale on the inside.- 3” Sight glass with liter and US gallon scale- Stainless steel AISI 304- Lid: 1 x 4” port, 2 x 1,5” ports, 1 x 2” port- Body: 4 x 1,5” ports- 1,5” tri-clamp stainless-steel butterfly sample valve- 2” tri-clamp stainless-steel butterfly dump valve- 2 stainless steel handles- Airlock, 3-piece, and silicone bung incl.- Tree fixed legsSize & WeightHeight: 108,5 cm (115 cm with airlock)Diameter at the top: 42 cmWeight Gross: 21,5 kgWeight Net: 16 kg- See product image gallery for dimensions
4” Lid With Coil Chiller - 338 mm
The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc. The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:338 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.
4” Lid With Coil Chiller - 521 mm
The 4” Lid with Coil Chiller is a exceptional brewing accessory designed for use with water, glycol chiller or similar systems. This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc. Perfect for Conicus Pro 55L. The core of this product is its stainless steel chilling coil. Immersed directly in your fermenting beer, it works efficiently to maintain ideal fermentation temperatures. The coil is crafted from high-quality stainless steel and is easy to clean, ensuring durability and reliability in your brewing process. Its length and width are thoughtfully designed to fit perfectly within the Conicus Pro 4" opening or similar systems.Installing the chilling coil is straightforward. It involves fitting the coil into the 4" opening and close it with the Tri-Clamp. For cooling, you will need an insulated tubing kit (either the one provided or your own), which connects the coil to your glycol chiller. This setup is vital for precise temperature control during fermentation, especially crucial when brewing lagers, which require colder fermenting temperatures.The 4" Lid with Coil Chiller also offers an efficient solution for cold crashing your beer. Cold crashing is a technique used to improve beer clarity and mouthfeel by bringing the beer to a low temperature, causing residual yeast and other particles to settle at the bottom of the fermenter.You can easily connect water, glycol chiller or similar systems to the inlet and outlet to the two male connections.We recomend bying the Conicus Pro 30 Insulation jacket with this Coil ChillerFeatures:521 mm long stainless-steel spiral cooler4" LidLid mounted two male connections for water or glycol chillerWith beer and Co2 postAISI 304 stainless-steelEasy to clean.Intergrated in the lid is a beer and CO2 post for carbonating and dispensing the beer. These posts are smart integral parts of the lid: one for adding gas (CO2) and the other for dispensing the liquid (beer).If you want to control the temperature during the fermentation the Conicus Pro can be mounted with this optional lid with a build-in cooling coil. This is a very simple, but effective way of controlling the temperature inside the fermenter.We recomend using the Ferminator for a more easy, effective and precise temperature regulating.This tri-clamp 4” Lid with Coil Chiller will fit many fermenters e.g., Conicus Pro, Ss Brewtech, Brewtools, Brew Monk etc.
Conicus Pro 30 Insulation Jacket
The jacket can retain the heat generated during the fermentation and improve the performance of the fermenter, even when you are fermenting in a cold room.The jacket is also a must if you have the lid with spiral cooler. The jacket can help with an even more controlled and effective temperature regulating inside the fermenter.Insulation thickness: 6 mm.Material: durable and rugged styrene butadiene rubber.
Conicus Pro 55 Insulation Jacket
The jacket can retain the heat generated during the fermentation and improve the performance of the fermenter, even when you are fermenting in a cold room.The jacket is also a must if you have the lid with spiral cooler. The jacket can help with an even more controlled and effective temperature regulating inside the fermenter.Insulation thickness: 6 mm.Material: durable and rugged styrene butadiene rubber.
1,5" Tri-Clamp Sample Valve With Racking Arm
This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.
1,5" Tri-Clamp Thermowell
This is a stainless-steel tri-clamp sample valve with a rotating rack arm mounted on a 3/8" tap with 13 mm barb. It is easy to mount.This valve can also be used for bottling directly from your Fermenter.This tri-clamp sample valve with racking arm will fit many fermenters e.g., Conicus, Ss Brewtech, Brewtools, Brew Monk etc.AISI 304 stainless-steel.Mounted valve for easy opening and closing.Easy to clean.Easy to mount.Tri-clamp standard.
Brewolution 70L Circuit Board Spare part
Brewolution 70L Circuit Board Spare part
Brewolution 40L/70L Mash Basket Steel Handle
Brewolution 40L/70L Mash Basket Steel Handle. Spare part.
The Home Brewery Brew Kit 25L
The Brew Kit 25L is the perfect complement to your automatic brewery - we've put together the things you need to start brewing. Just add bottles and Recipe Kits (ingredients).Brew Kit 25L contains:- 25-liter (30L max) fermenter with med tap och lid- 25-liter (30L max) fermenter with lid (no tap)- Fermenter air lock- Bottle filler (fits the fermenter tap)- Automatic pump siphon 44cm (Note: without holder and clamp)- Bench Capper Better Brew- Mash Paddle 52cm- Thermometer- Bottle Washer Spin Mini- SanitizerNote: Does not contain bottles or ingredients.
Brewolution Chiller 40 - 8,8 meter spiral
Brewolution Chiller 8,8m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Suitable for breweries, pots and kettles up to 40L. Fittings and hose not included.Diameter 25 cm.Height 37 cm.
Brewolution Chiller 70 - 16 meter spiral
Brewolution Chiller 16m in Stainless Steel with optimized distance between the spirals for faster cooling of the wort. Suitable for breweries, pots and kettles up to 70L. Fittings and hose not included.Diameter 30 cm.Height 53 cm.
Brewolution Fittings & Tubes Kit For Chiller 40 & 70
Brewolution Fittings and tubes Kit for Chiller 40 and 70. 2 x Fittings connector 3/8”, tap adaptor, tap connector and 2 x 1,5 m. tube is included.
Brewolution Sight Glass Plug for Brewster Beacon
Brewolution Sight Glass Plug for Brewster Beacon. Spare part.Level Gauge Plug for Brewster Beacon. Placed at the top of the Level Gauge.
Brewolution Seal for Sight Glass Plug for Brewster Beacon
Brewolution Seal for Sight Glass Plug for Brewster Beacon. Spare part.Seal for Level Gauge Plug for Brewster Beacon.